Configured the IP of the vlan according to the user manual, and found that the set IP address could not be pinged in the command line configuration interface of the device.
code show as below:
vlan 1000 standard port vlan 1000 0/9 0 interface vlanif 1000 ip address 10.50.1.10 255.255.255.0
I understand it as a switch, and ping the following with an IP. Then, if SDH and Layer 2 switches are used in the middle, can the OLT and the network management server be connected in the same network segment?
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."