ODUk + Client trail alarm monitoring
- x
- convention：
- Emotion(0)
|
Dear mljimenez I don't think it's possible. I'll confirm it for you again. Just a moment Please Hello, after confirming again, this function you said is not available. The method of configuring by template is usually used in the access network and data communication equipment. For the monitoring of an ODU-K channel, you can find it trail, you can see the status of the trail. If there is an alarm, the system will report it within tens of milliseconds.
In addition, if you want to filter certain alarms, you can set them in the alarm filter, and then filter
My answer hopes to help you, thank you！ |
|
|
Dear mljimenez I don't think it's possible. I'll confirm it for you again. Just a moment Please Hello, after confirming again, this function you said is not available. The method of configuring by template is usually used in the access network and data communication equipment. For the monitoring of an ODU-K channel, you can find it trail, you can see the status of the trail. If there is an alarm, the system will report it within tens of milliseconds.
In addition, if you want to filter certain alarms, you can set them in the alarm filter, and then filter
My answer hopes to help you, thank you！ |
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
