A customer wants to reset the Admin password. Please check the procedure below.
Procedure
1. Methods of resetting the password:
a) Connect the maintenance terminal to the serial port of the file engine node directly.
b) Log in to the CLI of the storage system from the maintenance terminal.
NOTE:
The login user name is _super_admin. When the CLI register to input the password Admin@revive, enter the Enter.
mirrobeijing_01: _super_admin> is displayed.
c) On the CLI, enter initpasswd
Please input the user(Attention:Master level): is displayed.
d) On the CLI, enter username.
NOTE:
username is the Admin user name that is to be initialized.
Init the passwd of master success.
Do you want to init another user(Attention:Master level).Cotinue(Y/y),exit(N/n) is displayed.
e) On CLI, enter N. Resetting a password is now complete.
The new password of Admin is Admin@storage.
