NQA ICMP for static routes does not work AR161FG-L

There is no license requirement for using nqa.

i think maybe your configuration is not correct.

you can config your nqa like this and test again

# 

test-type icmp

destination-address ipv4 192.168.3.2

frequency 2

interval seconds 1

timeout 1

probe-count 1

start now

#

Sorry for giving the partial config.

the idea is to track reachability of the static route and if it fails to switch to another route with a lower preference 
to perform this we need "nqa icmp test" and attach it to static route . Please the conf below. 

nqa test-instance NS_AANDEX ICMP
test-type icmp
destination-address ipv4 77.88.8.88
source-address ipv4 <IP_ADDRESS_SOURCE>
test-failtimes 3
description NS_AANDEX_TEST
frequency 10
probe-count 4
start now

ip route-static 0.0.0.0 0.0.0.0 <IP ADDRESS-1> track nqa admin ICMP 
ip route-static 0.0.0.0 0.0.0.0 <IP ADDRESS-2> preference 100

Solved

Well I contacted to Huawei Support and they told that FREQUENCY should be not less then 15 , better 20