Got it
Huawei Enterprise Support Community
Community Forums Access Network
No Traffic from ONT to th...

No Traffic from ONT to the OLT Uplink Port

Created: Jan 2, 2020 16:25:21Latest reply: Jan 7, 2020 16:03:22 3500 27 0 0 0
  HiCoins as reward： 0 (problem unresolved)
View the author 1#

Hello, everyone!


I have booted up a new OLT and done the basic configurations, including DBA profiles, Line profiles, Service Profiles, Add ONT, Native VLAN, Uplink VLAN, and Service Port.

I am trying to pass traffic from the ONT to a machine connected to the main switch.


NOTEBOOK----ONT----OLT----SWITCH----NOTEBOOK


I have added the HG8010H and the EG8247H board 0/0.


I have enabled auto find on the PON port 0/0/7.


I have added two ONTs


I have added VLAN 1000 and assigned this to the uplink port.


vlan 1000 smart

port vlan 1000 0/2 3


The two ONT are online and active


Surely at this point traffic should be passing from gpon 0/0/7 to 0/2/3 and to my main switch, but Currently, I am seeing nothing.


I do not need to configure anything other than what is required to directly pass traffic between the two devices OLT and main switch.


Can anyone suggest what can be done? It is needed to send some config files to the ONTs?


Thanks all and best regards!





Note: Text edited from the message originally sent by user_3279633

OLT Series

Like (0) Dislike (0) Favorite(0) Share Report
Previous: Como puedo hacer un port security en ONU MA5821
Next: Huawei HS8546V5 router - can't access login page
Featured Answers

Recommended answer

(0) (0)
liqiang185
Admin Created Jan 5, 2020 02:45:39

Posted by rbmelo at 2020-01-03 16:55 Here my current config: ROMA-OLT(config)#display current-configuration{ <cr>|ont<K>|port<K>|section ...
Hello rbmelo！
You can't see the exception from your configuration process, we suggest you contact your local TAC, apply for a problem ticket, and the TAC engineer will handle the problem for you remotely
Service Hotline:
https://e.huawei.com/en/service-hotline-query
Thank you!
View more
  • x
  • convention：

rbmelo
rbmelo Created Jan 6, 2020 17:55:06 (0) (0)
Thank You Liqiang185! But, anyway, I would like to try to solve with the contributions of our colleagues here in the Forum.  
liqiang185
liqiang185 Reply rbmelo  Created Jan 7, 2020 00:36:45 (0) (0)
OK, my friend, please pay attention to the security of your personal information when you upload data. Avoid causing losses  
All Answers
(0) (0)
2#
ManuM
ManuM Created Jan 2, 2020 17:14:50

Hi rbmelo, Given informations are incomplete. Could you please share the OLT configuration file. I am assuming that, you might have done some mistake in line-profile or service port configuration in the OLT side. Regards, Manu M
View more
  • x
  • convention：

liqiang185
liqiang185 Created Jan 7, 2020 00:41:31 (0) (0)
Dear ManuM! Thank you for helping rbmelo, please continue to help him solve the problem  
(0) (0)
3#
rbmelo
rbmelo Created Jan 2, 2020 18:50:03




Hi ManuM,

Please, see below my OLT configuration:

ROMA-OLT(config)#display current-configuration
{ <cr>|ont<K>|port<K>|section<K>|service-port<K>|simple<K>||<K> }:

Command:
display current-configuration
[Active: H801MCUD1; Standby: --]
[Patch Info: SPH202]
[MA5600V800R017: 5610]
#
[sysmode]
<sysmode>
switch adsl mode to rfc2662 vdsl mode to tr129
xpon mode switch-to profile-mode
voice-spec set vag-num 8
voice-spec set sip-account-num 2048
protocol support h248
system ex-mode backup
router mode basic
#
[global-config]
<global-config>
sysname ROMA-OLT
terminal user name buildrun_new_password root *J$1a$)NgI,N6R+#$@Ad)Tt|VR0<%|=; WL+F&y29H1O{%&;ZuNVG}oYr%$* 7 0000:00:00:00:00:00 0000:00:00:00:00:00 root 1
first-login-info 0 "-----"
traffic table ip index 10 name "CLI-20-MB" cir 20480 cbs 657360 pir 20480 pbs 657360 color-mode color-blind priority 0 priority-policy local-setting
traffic table ip index 11 name "CLI-35-MB" cir 35840 cbs 1148880 pir 35840 pbs 1148880 color-mode color-blind priority 0 priority-policy local-setting
traffic table ip index 12 name "CLI-50-MB" cir 51200 cbs 1640400 pir 51200 pbs 1640400 color-mode color-blind priority 0 priority-policy local-setting
dba-profile add profile-id 10 profile-name "CLI-20-MB" type1 fix 20480
bandwidth_compensate no
dba-profile add profile-id 11 profile-name "CLI-35-MB" type1 fix 35840
bandwidth_compensate no
dba-profile add profile-id 12 profile-name "CLI-50-MB" type1 fix 51200
bandwidth_compensate no
dba-profile add profile-id 100 profile-name "gp-dba_ia-50m" type4 max 51200
dba-profile add profile-id 101 profile-name "gp-dba_ia-100m" type4 max 102400
dba-profile add profile-id 102 profile-name "gp-dba_ia-200m" type4 max 204800
dba-profile add profile-id 500 profile-name "gp-dba_voz" type2 assure 1024
dba-profile add profile-id 501 profile-name "gp-dba_tv" type2 assure 1024
dba-profile add profile-id 502 profile-name "gp-dba_mng" type1 fix 1024
bandwidth_compensate no
ont wan-profile profile-id 1 profile-name "wan-profile_1"
nat enable
quit
ont-srvprofile gpon profile-id 1 profile-name "CLI-1MAC"
ont-port eth adaptive 8
port eth 1 max-mac-count 1
port eth 2 max-mac-count 1
port eth 3 max-mac-count 1
port eth 4 max-mac-count 1
commit
ont-srvprofile gpon profile-id 2 profile-name "CLI-2MAC"
ont-port eth adaptive 8
port eth 1 max-mac-count 1
port eth 2 max-mac-count 1
port eth 3 max-mac-count 1
port eth 4 max-mac-count 1
commit
ont-srvprofile gpon profile-id 100 profile-name "gp-srv_8247"
ont-port pots 2 eth 4 catv 1
port vlan eth 1 translation 1000 user-vlan 1000
port vlan eth 2 translation 1000 user-vlan 1000
port vlan eth 3 translation 1000 user-vlan 1000
port vlan eth 4 translation 1002 user-vlan 1002
commit
ont-srvprofile gpon profile-id 101 profile-name "gp-srv_8010"
ont-port eth 1
port vlan eth 1 translation 1000 user-vlan 1000
commit
ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0"
tcont 0 dba-profile-id 2
tcont 1 dba-profile-id 0
commit
quit
ont-lineprofile gpon profile-id 10 profile-name "gp-lin_50m"
tcont 2 dba-profile-id 100
gem add 20 eth tcont 2
gem mapping 20 0 vlan 1000
commit
quit
ont-lineprofile gpon profile-id 11 profile-name "gp-lin_100m"
tcont 2 dba-profile-id 101
gem add 24 eth tcont 2
gem mapping 24 0 vlan 1000
commit
quit
ont-lineprofile gpon profile-id 12 profile-name "gp-lin_200m"
tcont 2 dba-profile-id 102
gem add 28 eth tcont 2
gem mapping 28 0 vlan 1000
commit
quit
#
[device-config]
<device-config>
board add 0/0 H807GPBH
board add 0/4 H801MPWC
#
[public-config]
<public-config>
timezone GMT- 03:00
snmp-agent local-engineid 000007DB03002EC770304433
#
[vlan-config]
<vlan-config>
vlan 100 smart
vlan 1000 smart
vlan name 100 "OLT-01-WAN"
port vlan 100 0/2 0
port vlan 1000 0/2 3
#
[mcu]
<mcu-0/2>
interface mcu 0/2
mdi 0 normal
speed 0 1000
speed 1 1000
speed 2 1000
mdi 3 normal
speed 3 1000
#
[gpon]
<gpon-0/0>
interface gpon 0/0
port 0 ont-auto-find enable
port 0 fec enable
port pon-id 0 enable
port 1 ont-auto-find enable
port 1 fec enable
port 2 ont-auto-find enable
port 2 fec enable
port 3 ont-auto-find enable
port 3 fec enable
port 4 ont-auto-find enable
port 4 fec enable
port 5 ont-auto-find enable
port 5 fec enable
port 6 ont-auto-find enable
port 6 fec enable
port 7 ont-auto-find enable
port 7 fec enable
ont add 7 0 sn-auth "4857544393A1FD9B" omci ont-lineprofile-id 10
ont-srvprofile-id 100 desc "ONT_NO_DESCRIPTION"
ont ipconfig 7 0 static ip-address 10.10.150.101 mask 255.255.255.0 vlan 1000 priority 5 gateway 10.10.150.1
ont add 7 1 sn-auth "48575443F30E1292" omci ont-lineprofile-id 11
ont-srvprofile-id 101 desc "ONT_NO_DESCRIPTION"
ont ipconfig 7 1 static ip-address 10.10.150.100 mask 255.255.255.0 vlan 1000 priority 5 gateway 10.10.150.1
ont port native-vlan 7 0 eth 1 vlan 1000 priority 0
ont port native-vlan 7 1 eth 1 vlan 1000 priority 0
#
[emu-config]
<emu-config>
emu add 0 fan 0 1 "H831FCBB"
#
[bbs-config]
<bbs-config>
service-port 50 vlan 1000 gpon 0/0/7 ont 0 gemport 20 multi-service user-vlan 1000 tag-transform translate inbound traffic-table index 12 outbound
traffic-table index 12
service-port 51 vlan 1000 gpon 0/0/7 ont 1 gemport 24 multi-service user-vlan 1000 tag-transform translate inbound traffic-table index 12 outbound
traffic-table index 12
#
[config]
<config>
mpls label start 8192
#
[preloopback]
<preloopback>
interface loopback0
#
[meth]
<meth0>
interface meth0
ip address 10.11.104.2 255.255.255.0
#
[null]
<null0>
interface null0
#
[loopback]
<loopback0>
interface loopback0
#
[aaa]
<aaa>
aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
#
[post-system]
<post-system>
ip route-static 0.0.0.0 0.0.0.0 10.10.150.1
ssh user root authentication-type password
#
return
View more
  • x
  • convention：
(0) (0)
4#
rbmelo
rbmelo Created Jan 2, 2020 19:04:55

The "ont ipconfig 7 0 static ip-address" lines, was added later as an attempt.
View more
  • x
  • convention：
(0) (0)
5#
rbmelo
rbmelo Created Jan 3, 2020 16:55:01

Here my current config:

ROMA-OLT(config)#display current-configuration
{ <cr>|ont<K>|port<K>|section<K>|service-port<K>|simple<K>||<K> }:

Command:
display current-configuration
[Active: H801MCUD1; Standby: --]
[Patch Info: SPH202]
[MA5600V800R017: 5610]
#
[sysmode]
<sysmode>
switch adsl mode to rfc2662 vdsl mode to tr129
xpon mode switch-to profile-mode
voice-spec set vag-num 8
voice-spec set sip-account-num 2048
protocol support h248
system ex-mode backup
router mode basic
#
[global-config]
<global-config>
sysname ROMA-OLT
terminal user name buildrun_new_password root *J$1a$)NgI,N6R+#$@Ad)Tt|VR0<%|=; WL+F&y29H1O{%&;ZuNVG}oYr%$* 7 0000:00:00:00:00:00 0000:00:00:00:00:00 root 1
first-login-info 0 "-----"
traffic table ip index 10 name "CLI-20-MB" cir 20480 cbs 657360 pir 20480 pbs 657360 color-mode color-blind priority 0 priority-policy local-setting
traffic table ip index 11 name "CLI-35-MB" cir 35840 cbs 1148880 pir 35840 pbs 1148880 color-mode color-blind priority 0 priority-policy local-setting
traffic table ip index 12 name "CLI-50-MB" cir 51200 cbs 1640400 pir 51200 pbs 1640400 color-mode color-blind priority 0 priority-policy local-setting
dba-profile add profile-id 10 profile-name "CLI-20-MB" type1 fix 20480
bandwidth_compensate no
dba-profile add profile-id 11 profile-name "CLI-35-MB" type1 fix 35840
bandwidth_compensate no
dba-profile add profile-id 12 profile-name "CLI-50-MB" type1 fix 51200
bandwidth_compensate no
dba-profile add profile-id 100 profile-name "gp-dba_ia-50m" type4 max 51200
dba-profile add profile-id 101 profile-name "gp-dba_ia-100m" type4 max 102400
dba-profile add profile-id 102 profile-name "gp-dba_ia-200m" type4 max 204800
dba-profile add profile-id 500 profile-name "gp-dba_voz" type2 assure 1024
dba-profile add profile-id 501 profile-name "gp-dba_tv" type2 assure 1024
dba-profile add profile-id 502 profile-name "gp-dba_mng" type1 fix 1024
bandwidth_compensate no
ont wan-profile profile-id 1 profile-name "wan-profile_1"
nat enable
quit
ont-srvprofile gpon profile-id 1 profile-name "CLI-1MAC"
ont-port eth adaptive 8
port eth 1 max-mac-count 1
port eth 2 max-mac-count 1
port eth 3 max-mac-count 1
port eth 4 max-mac-count 1
commit
ont-srvprofile gpon profile-id 2 profile-name "CLI-2MAC"
ont-port eth adaptive 8
port eth 1 max-mac-count 1
port eth 2 max-mac-count 1
port eth 3 max-mac-count 1
port eth 4 max-mac-count 1
commit
ont-srvprofile gpon profile-id 100 profile-name "gp-srv_8247"
ont-port pots 2 eth 4 catv 1
port vlan eth 1 translation 1000 user-vlan 1000
port vlan eth 2 translation 1000 user-vlan 1000
port vlan eth 3 translation 1000 user-vlan 1000
port vlan eth 4 translation 1002 user-vlan 1002
commit
ont-srvprofile gpon profile-id 101 profile-name "gp-srv_8010"
ont-port eth 1
port vlan eth 1 translation 1000 user-vlan 1000
commit
ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0"
tcont 0 dba-profile-id 2
tcont 1 dba-profile-id 0
commit
quit
ont-lineprofile gpon profile-id 10 profile-name "gp-lin_50m"
tcont 2 dba-profile-id 100
gem add 20 eth tcont 2
gem mapping 20 0 vlan 1000
commit
quit
ont-lineprofile gpon profile-id 11 profile-name "gp-lin_100m"
tcont 2 dba-profile-id 101
gem add 24 eth tcont 2
gem mapping 24 0 vlan 1000
commit
quit
ont-lineprofile gpon profile-id 12 profile-name "gp-lin_200m"
tcont 2 dba-profile-id 102
gem add 28 eth tcont 2
gem mapping 28 0 vlan 1000
commit
quit
#
[device-config]
<device-config>
board add 0/0 H807GPBH
board add 0/4 H801MPWC
#
[public-config]
<public-config>
timezone GMT- 03:00
snmp-agent local-engineid 000007DB03002EC770304433
#
[vlan-config]
<vlan-config>
vlan 1000 smart
port vlan 1000 0/2 3
#
[mcu]
<mcu-0/2>
interface mcu 0/2
mdi 0 normal
speed 0 1000
speed 1 1000
speed 2 1000
mdi 3 normal
speed 3 1000
#
[gpon]
<gpon-0/0>
interface gpon 0/0
port 0 ont-auto-find enable
port 0 fec enable
port pon-id 0 enable
port 1 ont-auto-find enable
port 1 fec enable
port 2 ont-auto-find enable
port 2 fec enable
port 3 ont-auto-find enable
port 3 fec enable
port 4 ont-auto-find enable
port 4 fec enable
port 5 ont-auto-find enable
port 5 fec enable
port 6 ont-auto-find enable
port 6 fec enable
port 7 ont-auto-find enable
port 7 fec enable
ont add 7 0 sn-auth "4857544393A1FD9B" omci ont-lineprofile-id 10
ont-srvprofile-id 100 desc "ONT_NO_DESCRIPTION"
ont add 7 1 sn-auth "48575443F30E1292" omci ont-lineprofile-id 11
ont-srvprofile-id 101 desc "ONT_NO_DESCRIPTION"
ont port native-vlan 7 0 eth 1 vlan 1000 priority 0
ont port native-vlan 7 1 eth 1 vlan 1000 priority 0
#
[emu-config]
<emu-config>
emu add 0 fan 0 1 "H831FCBB"
#
[bbs-config]
<bbs-config>
service-port 50 vlan 1000 gpon 0/0/7 ont 0 gemport 20 multi-service user-vlan 1000 tag-transform translate inbound traffic-table index 12 outbound
traffic-table index 12
service-port 51 vlan 1000 gpon 0/0/7 ont 1 gemport 24 multi-service user-vlan 1000 tag-transform translate inbound traffic-table index 12 outbound
traffic-table index 12
#
[config]
<config>
mpls label start 8192
#
[preloopback]
<preloopback>
interface loopback0
#
[meth]
<meth0>
interface meth0
ip address 10.11.104.2 255.255.255.0
#
[null]
<null0>
interface null0
#
[loopback]
<loopback0>
interface loopback0
#
[aaa]
<aaa>
aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
#
[post-system]
<post-system>
ip route-static 0.0.0.0 0.0.0.0 10.10.150.1
ssh user root authentication-type password
#
return
View more
  • x
  • convention：

ManuM
ManuM Created Jan 6, 2020 05:45:07 (0) (0)
Hi,

could you please share the result of " display ont info 0 7 all " result. You might able to see "config state fail". I am assuming that the problem is related to GEM port number which using inside the ONT-Line profile 10 & 11". The GEM numbers are beyond the ONT capability, so it might not work. So recommending to use the GEM number between 0~10. I hope the GEM port number correction will solve your problem.

Thank You.  
rbmelo
rbmelo Reply ManuM  Created Jan 6, 2020 12:54:01 (0) (0)
Hi ManuM,

I shared the result as new comment, below. And I am sharing too the results of other commands, which may have some other relevant information. thank you.  
rbmelo
rbmelo Reply rbmelo  Created Jan 6, 2020 13:00:38 (0) (0)
Specifically regarding to the config state, the result is: "Config state: normal"  
(0) (0)
6#
liqiang185
liqiang185 Admin Created Jan 5, 2020 02:45:39

Posted by rbmelo at 2020-01-03 16:55 Here my current config: ROMA-OLT(config)#display current-configuration{ <cr>|ont<K>|port<K>|section ...
Hello rbmelo！
You can't see the exception from your configuration process, we suggest you contact your local TAC, apply for a problem ticket, and the TAC engineer will handle the problem for you remotely
Service Hotline:
https://e.huawei.com/en/service-hotline-query
Thank you!
View more
  • x
  • convention：

rbmelo
rbmelo Created Jan 6, 2020 17:55:06 (0) (0)
Thank You Liqiang185! But, anyway, I would like to try to solve with the contributions of our colleagues here in the Forum.  
liqiang185
liqiang185 Reply rbmelo  Created Jan 7, 2020 00:36:45 (0) (0)
OK, my friend, please pay attention to the security of your personal information when you upload data. Avoid causing losses  
(0) (0)
7#
rbmelo
rbmelo Created Jan 6, 2020 10:49:37

Hi ManuM
Here is the result of the command:

Command:
display ont info 0 0 7 all
-----------------------------------------------------------------------------
F/S/P ONT SN Control Run Config Match Protect
ID flag state state state side
-----------------------------------------------------------------------------
0/ 0/7 0 4857544393A1FD9B active online normal match no
0/ 0/7 1 48575443F30E1292 active online normal match no
-----------------------------------------------------------------------------
F/S/P ONT-ID Description
-----------------------------------------------------------------------------
0/ 0/7 0 ONT_NO_DESCRIPTION
0/ 0/7 1 ONT_NO_DESCRIPTION
-----------------------------------------------------------------------------
In port 0/ 0/7 , the total of ONTs are: 2, online: 2
-----------------------------------------------------------------------------

ROMA-OLT(config)#
View more
  • x
  • convention：
(0) (0)
8#
rbmelo
rbmelo Created Jan 6, 2020 13:02:04

Hi, this is the result for the info command for the "ONT 1" :


ROMA-OLT(config-if-gpon-0/0)#display ont info 7 1
-----------------------------------------------------------------------------
F/S/P : 0/0/7
ONT-ID : 1
Control flag : active
Run state : online
Config state : normal
Match state : match
DBA type : SR
ONT distance(m) : 21
ONT last distance(m) : 20
ONT battery state : not support
Memory occupation : 49%
CPU occupation : 1%
Temperature : 50(C)
Authentic type : SN-auth
SN : 48575443F30E1292 (HWTC-F30E1292)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
Description : ONT_NO_DESCRIPTION
Last down cause : ONT is reset by ONT command
Last up time : 2020-01-03 03:45-03:00
Last down time : 2020-01-03 03:45-03:00
Last dying gasp time : 2020-01-03 03:45-03:00
ONT online duration : 2 day(s), 20 hour(s), 10 minute(s), 25 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 11
Line profile name : gp-lin_100m
-----------------------------------------------------------------------------
FEC upstream switch :Disable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Disable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 2> DBA Profile-ID:101
<Gem Index 24>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:off |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 1000 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 101
Service profile name : gp-srv_8010
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS 0 -
ETH 1 -
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 0 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : Unconcern
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Translation 1 1000 - 1000 - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
View more
  • x
  • convention：
(0) (0)
9#
rbmelo
rbmelo Created Jan 6, 2020 13:15:11

And this is the result for the info command for the "ONT 0" :


Command:
display ont info 0 0 7 0
-----------------------------------------------------------------------------
F/S/P : 0/0/7
ONT-ID : 0
Control flag : active
Run state : online
Config state : normal
Match state : match
DBA type : SR
ONT distance(m) : 17
ONT last distance(m) : 17
ONT battery state : not support
Memory occupation : 82%
CPU occupation : 1%
Temperature : 50(C)
Authentic type : SN-auth
SN : 4857544393A1FD9B (HWTC-93A1FD9B)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
ONT IP 0 address/mask : -
Description : ONT_NO_DESCRIPTION
Last down cause : reset
Last up time : 2019-12-17 10:32-03:00
Last down time : 2019-12-17 10:32-03:00
Last dying gasp time : -
ONT online duration : 19 day(s), 15 hour(s), 41 minute(s), 11 second(s)
Type C support : Not support
Interoperability-mode : ITU-T
Power reduction status : -
FEC upstream state : use-profile-config
-----------------------------------------------------------------------------
VoIP configure method : Default
-----------------------------------------------------------------------------
Line profile ID : 10
Line profile name : gp-lin_50m
-----------------------------------------------------------------------------
FEC upstream switch :Disable
OMCC encrypt switch :Off
Qos mode :PQ
Mapping mode :VLAN
TR069 management :Disable
TR069 IP index :0
-----------------------------------------------------------------------------
Notes: * indicates Discrete TCONT(TCONT Unbound)
-----------------------------------------------------------------------------
<T-CONT 0> DBA Profile-ID:1
<T-CONT 2> DBA Profile-ID:100
<Gem Index 20>
--------------------------------------------------------------------
|Serv-Type:ETH |Encrypt:off |Cascade:off |GEM-CAR:- |
|Upstream-priority-queue:0 |Downstream-priority-queue:- |
--------------------------------------------------------------------
Mapping VLAN Priority Port Port Bundle Flow Transparent
index type ID ID CAR
--------------------------------------------------------------------
0 1000 - - - - - -
--------------------------------------------------------------------
-----------------------------------------------------------------------------
Notes: Run the display traffic table ip command to query
traffic table configuration
-----------------------------------------------------------------------------
Service profile ID : 100
Service profile name : gp-srv_8247
-----------------------------------------------------------------------------
Port-type Port-number Max-adaptive-number
-----------------------------------------------------------------------------
POTS 2 -
ETH 4 -
VDSL 0 -
TDM 0 -
MOCA 0 -
CATV 1 -
-----------------------------------------------------------------------------
TDM port type : E1
TDM service type : TDMoGem
MAC learning function switch : Enable
ONT transparent function switch : Disable
Ring check switch : Disable
Ring port auto-shutdown : Enable
Ring detect frequency : 8 (pps)
Ring resume interval : 300 (s)
Multicast forward mode : Unconcern
Multicast forward VLAN : -
Multicast mode : Unconcern
Upstream IGMP packet forward mode : Unconcern
Upstream IGMP packet forward VLAN : -
Upstream IGMP packet priority : -
Native VLAN option : Concern
Upstream PQ color policy : -
Downstream PQ color policy : -
-----------------------------------------------------------------------------
Port-type Port-ID QinQmode PriorityPolicy Inbound Outbound
-----------------------------------------------------------------------------
ETH 1 unconcern unconcern unconcern unconcern
ETH 2 unconcern unconcern unconcern unconcern
ETH 3 unconcern unconcern unconcern unconcern
ETH 4 unconcern unconcern unconcern unconcern
-----------------------------------------------------------------------------
Notes: * indicates the discretely configured traffic profile,
run the display traffic table ip command to query
traffic table configuration.
-----------------------------------------------------------------------------
Port-type Port-ID DownstreamMode MismatchPolicy
-----------------------------------------------------------------------------
ETH 1 operation discard
ETH 2 operation discard
ETH 3 operation discard
ETH 4 operation discard
-----------------------------------------------------------------------------
Port-type Port-ID Dscp-mapping-table-index
-----------------------------------------------------------------------------
ETH 1 0
ETH 2 0
ETH 3 0
ETH 4 0
IPHOST 1 0
-----------------------------------------------------------------------------
Port Port Service-type Index S-VLAN S-PRI C-VLAN C-PRI ENCAP S-PRI
type ID POLICY
-----------------------------------------------------------------------------
ETH 1 Translation 1 1000 - 1000 - - -
ETH 2 Translation 1 1000 - 1000 - - -
ETH 3 Translation 1 1000 - 1000 - - -
ETH 4 Translation 1 1002 - 1002 - - -
-----------------------------------------------------------------------------
Notes: * indicates transparent attribute of the vlan
-----------------------------------------------------------------------------
Port-type Port-ID IGMP-mode IGMP-VLAN IGMP-PRI Max-MAC-Count
-----------------------------------------------------------------------------
ETH 1 - - - Unlimited
ETH 2 - - - Unlimited
ETH 3 - - - Unlimited
ETH 4 - - - Unlimited
-----------------------------------------------------------------------------
Alarm policy profile ID : 0
Alarm policy profile name : alarm-policy_0
-----------------------------------------------------------------------------
View more
  • x
  • convention：
(0) (0)
10#
rbmelo
rbmelo Created Jan 6, 2020 13:21:38

I am sharing too some screenshots of the ONT 1 web interface.:


Eth Port Information

Device Information

Optical Information

Service Provisioning Status


View more
  • x
  • convention：
12
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.