Hello, everyone!
I have booted up a new OLT and done the basic configurations, including DBA profiles, Line profiles, Service Profiles, Add ONT, Native VLAN, Uplink VLAN, and Service Port.
I am trying to pass traffic from the ONT to a machine connected to the main switch.
NOTEBOOK----ONT----OLT----SWITCH----NOTEBOOK
I have added the HG8010H and the EG8247H board 0/0.
I have enabled auto find on the PON port 0/0/7.
I have added two ONTs.
I have added VLAN 1000 and assigned this to the uplink port.
vlan 1000 smart
port vlan 1000 0/2 3
The two ONT are online and active.
Surely at this point traffic should be passing from gpon 0/0/7 to 0/2/3 and to my main switch, but Currently, I am seeing nothing.
I do not need to configure anything other than what is required to directly pass traffic between the two devices OLT and main switch.
Can anyone suggest what can be done? It is needed to send some config files to the ONTs?
Thanks all and best regards.
Note: Text edited from the message originaly sent by user_3279633
