Description
No prompt message is played when the mobile user rejects the call.
Solution
Possible Causes
A possible cause is that the mobile user is not the last user for the sequential ringing service.
Procedure
See LMT-based Login and Configuration to log in to the LMT and access the command tree configuration mode.
- Run the show subscriber unicall dn <string> command to check whether the value of Priority in Terminal bind information is 3.
[%eSpace U1930(config)]#show subscriber unicall dn 5002 UserSerialNo Dn SubPBXNo State BusySelectMode PriorityMode RingMode SelectInterval ------------ ---- -------- ---------- -------------- ------------ -------- -------------- 169 5002 0 FAULT all static append 12(s) Terminal bind infomation Index Type Info Priority UseTime Timeindex Status ------ ------------- ---- -------- ------- --------- ------------ 0 SIPUE(NATIVE) 5006 0 No - FAULT/LOGOUT 1 PSTNDN 137888 0 No - FAULT ------- Matched record number : [2] ------- ==== Command executed success ! ====- Run the config modify subscriber unicall dn <string> modbind pstnnum value <string> priority 3 command to change the mobile.
