Got it

Enterprise

Community Forums Switches

no logging event link-sta...

no logging event link-status alternative

Created: Nov 22, 2019 08:12:02Latest reply: Nov 22, 2019 08:33:49 412 2 0 0

Rewarded HiCoins： 0 (problem resolved)

display all floors ^#1

Hi,

Can someone kindly inform me if there's a Huawei alternative for the Cisco configuration command "no logging event link-status"? Setting "undo enable snmp trap updown" still floods the switch's logging it self with link up/down messages. For customer facing interfaces I don't really care about those events but for north-bound interfaces I do want them so it can't be a global command.

Thanks in advance

x
convention：

I have this problem too (0) Favorite(0) Report

 Previous: Possible Causes of OSPF Neighbor Down

Next: Switch auto boot fail.

Featured Answers

Recommended answer

(0) (0)

chenhui Admin Created Nov 22, 2019 08:33:49

@Erik_van_der_Burg well, command "undo enable snmp trap updown" is an interface command. please check this http://support.huawei.com/hedex/hdx.do?docid=EDOC1100037168&lang=en&ui=1&tocURL=resources/dc/enable_snmp_trap_updown.html

View more

x
convention：

Erik_van_der_Burg Created Nov 25, 2019 07:49:32
Hi, Thanks you for your answer. As I stated that command still means that link interface up/down events are visible in the local log. So this command is only working for the SNMP traps, not the local logging, while I would also like the interface events to be not logged in the local log of the switch.

Kind regards,
Erik van der Burg

All Answers

chenhui Admin Created Nov 22, 2019 08:33:49

@Erik_van_der_Burg well, command "undo enable snmp trap updown" is an interface command. please check this http://support.huawei.com/hedex/hdx.do?docid=EDOC1100037168&lang=en&ui=1&tocURL=resources/dc/enable_snmp_trap_updown.html

View more

x
convention：

Erik_van_der_Burg Created Nov 25, 2019 07:49:32
Hi, Thanks you for your answer. As I stated that command still means that link interface up/down events are visible in the local log. So this command is only working for the SNMP traps, not the local logging, while I would also like the interface events to be not logged in the local log of the switch.

Kind regards,
Erik van der Burg

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.