Network Diagram for the Cluster

Created: Jan 9, 2019 06:57:40 171 0 0 0 0

Figure 1 shows the networking diagram for the SMC2.0 cluster to be set up.

Figure 1 Networking diagram
http://localhost:7890/pages/SEE1219N/13/SEE1219N/13/resources/SMC_cisg/en-us_image_0027008634.png

Table 1 describes the nodes in the network diagram.

**Table 1** Nodes in the network diagram
Node	Description
VP1/VP2	VP1 and VP2 function as node servers in the SMC2.0 cluster to bear the SMC2.0 and database cluster services. VP1 and VP2 are connected using a common network cable to form a heartbeat network. VP1 and VP2 are connected to the switch using common network cables to form a service network. VP1 and VP2 are connected to the disk array using common network cables to transmit service data.
Disk array	The disk array stores the service data generated when the SMC2.0 runs. The disk array and switch are connected using a common network cable so you can configure the disk array by using a third-party tool such as an SSH tool. The disk array and computer are connected using a serial cable so you can configure the disk array through serial ports.
Domain1	Domain1 indicates the domain controller server and is connected to the switch using a common network cable.
SC1	SC1 is a standalone SC server. Connect both the management network port and the LAN port of the server to the switch.
PC	The PC is used to manage the disk array through the serial port or to configure servers through SSH.