Got it
Huawei Enterprise Support Community
Community Forums Routing & Switching
Network class - September...

Network class - September 13th [Community Learning Week •Phase 6] Activity

END Latest reply: Sep 14, 2021 09:48:42 1207 70 37 0 0
View the author 1#

【Answer】1. A    2. A    3. ABCD    4. ABCD    5. ABC

【Winner】thi_bay,    Jul_ang,    DragonVN,    user_4001805,   shakeela

----------------------



Hello, everyone!

Join the Community Learning week Network Routing&Switching Basics!

1

Network class learning time of this phase: September 13th – September 18th.
Answer time of this class: September 13th, 8 AM - September 14th, 4 PM (UTC+0).


Class topic

Post 1. The basic configuration of STP

On an Ethernet network, you can configure basic STP functions on switching devices to prune the network into a tree to eliminate loops...More


Post 2. Enhancing STP and Configuring STP Protection

Huawei data communication equipment supports the four protection functions. You can configure one or more protection functions according to the actual situation...More


Post 3. Other Layer 2 Loop Elimination Technologies

Currently, multiple Ethernet Layer 2 loop elimination technologies have been developed. This document summarizes and analyzes these technologies...More


Post 4. SEP

Smart Ethernet Protection (SEP) is a ring network protocol dedicated to the Ethernet link layer. It uses SEP segments as the basic unit. A SEP segment consists of a group of interconnected Layer 2 switching devices configured with the same SEP segment ID and control VLAN...More


Post 5. ERPS

ERPS (Ethernet Ring Protection Switching) is a protocol defined by the International Telecommunication Union - Telecommunication Standardization Sector (ITU-T) to eliminate loops at Layer 2...More


Class Q&As

After attending this class, please answer all the following questions and submit. Once submitted, the answer cannot be modified.


Click to learn: >>> next class - Transmission

    *1. When the port path cost calculation method is configured as legacy,what is the range of the parameter cost? (Single choice)

  • A. 1 - 200000
  • B. 1 - 65535
  • C. 1 - 200000000

    *2. An edge port does not participate in spanning tree calculation. It can transition to the Forwarding state immediately after being activated. (Single choice)

  • A. True
  • B. False

    *3. What are the types of nodes on an RRPP ring? (Multiple choices)

  • A. Master node
  • B. Transit node
  • C. Edge node
  • D. Assistant edge node

    *4. What are the sub-roles of SEP edge interfaces? (Multiple choices)

  • A. Primary edge interface
  • B. Secondary edge interface
  • C. No-neighbor primary edge interface
  • D. No-neighbor secondary edge interface

    *5. What are the advantages of ERPS? (Multiple choices)

  • A. Prevents broadcast storms and implements fast traffic switchover on a network where there are loops
  • B. Provides fast convergence and carrier-class reliability
  • C. Allows all ERPS-capable devices on a ring network to communicate

The post is synchronized to:  Learning Week

Like (37) Dislike (0) Favorite(0) Share Report
Previous: V600R005C00SPCb00
Next: TPID
(0) (0)
2#
Lan59
Admin Created Sep 13, 2021 07:11:17

Network class - September 13th [Community Learning Week •Phase 6]-4133417-1
View more
  • x
  • convention：
(0) (0)
3#
DDSN
Admin Created Sep 13, 2021 07:13:11

@Abdul_Qadir @user_4358465 @AL_93 @user_3726344 @Diego.Silva @sachandio @LE321 @Abdul500 @EdelChino @Wumingxj @user_4326135 @CyberTec @scidox @sam_san @Mario12345 @ruthy @AlSafy @Malik3000 @Rumana @Mr_ravirajput @zaheernew @hemin88 @Saqib4124 @page2me @Aamir_Mughal @K92 @Null_0 @andersoncf1 @Kevin_Thomas @Vlada85 @ankush @jialuo1128 @bagic @kakuye @little_fish @dfahad @user_4055953 @user_4048289 @Tongun @user_3998471 @Raks @user_3015189 @Lianet @Ddkompik @BAZ @user_3952505 @rimon @LSA @Kolli @Unicef @Wala @wissal @daniellima @nabiuddin.mohammed @JobMuhongo @bek7 @user_3754066 @Rouffa @sohaib.ansar Come and enjoy the new learning party!
View more
  • x
  • convention：
(0) (0)
4#
Unicef
MVE Created Sep 13, 2021 07:14:04

1.A

2.A

3.ABCD

4.ABCD

5.ABC
View more
  • x
  • convention：
(0) (0)
5#
fatt
Created Sep 13, 2021 08:00:20

1. When the port path cost calculation method is configured as legacy,what is the range of the parameter cost?(Single choice)

A. 1 - 200000

2. An edge port does not participate in spanning tree calculation. It can transition to the Forwarding state immediately after being activated.(Single choice)

A. True

3. What are the types of nodes on an RRPP ring?

A. Master node
B. Transit node
C. Edge node
D. Assistant edge node

4. What are the sub-roles of SEP edge interfaces?

A. Primary edge interface
B. Secondary edge interface
C. No-neighbor primary edge interface
D. No-neighbor secondary edge interface

5. What are the advantages of ERPS?

A. Prevents broadcast storms and implements fast traffic switchover on a network where there are loops
B. Provides fast convergence and carrier-class reliability
C. Allows all ERPS-capable devices on a ring network to communicate
View more
  • x
  • convention：
(0) (0)
6#
Loti_fa
Created Sep 13, 2021 08:01:16

1. When the port path cost calculation method is configured as legacy,what is the range of the parameter cost?(Single choice)

A. 1 - 200000

2. An edge port does not participate in spanning tree calculation. It can transition to the Forwarding state immediately after being activated.(Single choice)

A. True

3. What are the types of nodes on an RRPP ring?

A. Master node
B. Transit node
C. Edge node
D. Assistant edge node

4. What are the sub-roles of SEP edge interfaces?

A. Primary edge interface
B. Secondary edge interface
C. No-neighbor primary edge interface
D. No-neighbor secondary edge interface

5. What are the advantages of ERPS?

A. Prevents broadcast storms and implements fast traffic switchover on a network where there are loops
B. Provides fast convergence and carrier-class reliability
C. Allows all ERPS-capable devices on a ring network to communicate
View more
  • x
  • convention：
(0) (0)
7#
mrom
Created Sep 13, 2021 08:02:05

1. When the port path cost calculation method is configured as legacy,what is the range of the parameter cost?(Single choice)

A. 1 - 200000

2. An edge port does not participate in spanning tree calculation. It can transition to the Forwarding state immediately after being activated.(Single choice)

A. True

3. What are the types of nodes on an RRPP ring?

A. Master node
B. Transit node
C. Edge node
D. Assistant edge node

4. What are the sub-roles of SEP edge interfaces?

A. Primary edge interface
B. Secondary edge interface
C. No-neighbor primary edge interface
D. No-neighbor secondary edge interface

5. What are the advantages of ERPS?

A. Prevents broadcast storms and implements fast traffic switchover on a network where there are loops
B. Provides fast convergence and carrier-class reliability
C. Allows all ERPS-capable devices on a ring network to communicate
View more
  • x
  • convention：
(0) (0)
8#
Jul_ang
Created Sep 13, 2021 08:02:52

1. When the port path cost calculation method is configured as legacy,what is the range of the parameter cost?(Single choice)

A. 1 - 200000

2. An edge port does not participate in spanning tree calculation. It can transition to the Forwarding state immediately after being activated.(Single choice)

A. True

3. What are the types of nodes on an RRPP ring?

A. Master node
B. Transit node
C. Edge node
D. Assistant edge node

4. What are the sub-roles of SEP edge interfaces?

A. Primary edge interface
B. Secondary edge interface
C. No-neighbor primary edge interface
D. No-neighbor secondary edge interface

5. What are the advantages of ERPS?

A. Prevents broadcast storms and implements fast traffic switchover on a network where there are loops
B. Provides fast convergence and carrier-class reliability
C. Allows all ERPS-capable devices on a ring network to communicate
View more
  • x
  • convention：
(0) (0)
9#
gho_ah
Created Sep 13, 2021 08:03:41

1. When the port path cost calculation method is configured as legacy,what is the range of the parameter cost?(Single choice)

A. 1 - 200000

2. An edge port does not participate in spanning tree calculation. It can transition to the Forwarding state immediately after being activated.(Single choice)

A. True

3. What are the types of nodes on an RRPP ring?

A. Master node
B. Transit node
C. Edge node
D. Assistant edge node

4. What are the sub-roles of SEP edge interfaces?

A. Primary edge interface
B. Secondary edge interface
C. No-neighbor primary edge interface
D. No-neighbor secondary edge interface

5. What are the advantages of ERPS?

A. Prevents broadcast storms and implements fast traffic switchover on a network where there are loops
B. Provides fast convergence and carrier-class reliability
C. Allows all ERPS-capable devices on a ring network to communicate
View more
  • x
  • convention：
(0) (0)
10#
thi_bay
Created Sep 13, 2021 08:04:24

1. When the port path cost calculation method is configured as legacy,what is the range of the parameter cost?(Single choice)

A. 1 - 200000

2. An edge port does not participate in spanning tree calculation. It can transition to the Forwarding state immediately after being activated.(Single choice)

A. True

3. What are the types of nodes on an RRPP ring?

A. Master node
B. Transit node
C. Edge node
D. Assistant edge node

4. What are the sub-roles of SEP edge interfaces?

A. Primary edge interface
B. Secondary edge interface
C. No-neighbor primary edge interface
D. No-neighbor secondary edge interface

5. What are the advantages of ERPS?

A. Prevents broadcast storms and implements fast traffic switchover on a network where there are loops
B. Provides fast convergence and carrier-class reliability
C. Allows all ERPS-capable devices on a ring network to communicate
View more
  • x
  • convention：
1234567
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.