Got it

Network and Remote System Environment Check

Created: Aug 20, 2021 09:19:51Latest reply: Aug 20, 2021 09:51:19 343 5 0 0 0
  Rewarded HiCoins: 1 (problem resolved)

Hello,


So I am deploying Easysuite 1.3 on a VM server for Agile_Controller-Campus_V100R003C60SPC205 and right now stuck at Network check. 

1

I have been following the steps from the document Agile Controller-Campus V100R003C60 EasySuite Installation Guide(EasySuite 1.3). 

Can someone help me out?

Featured Answers

Recommended answer

DDSN
Admin Created Aug 20, 2021 09:51:19

Hi user_4342345,
Please ensure that the IP addresses of the server management port, eth0 port, and switch are on the same network segment of the PC where EasySuite is installed. The default IP address of the iBMC management network port is 192.168. 2.100, and the subnet mask is 255.255. 255.0.
View more
  • x
  • convention:

SyedShariq
SyedShariq Created Aug 20, 2021 10:09:32 (0) (0)
Ok I have changed the start-end ip to --> start 192.168.2.2 end 192.168.2.2 and BMC to 192.168.2.100 but its still not passing the check. Also note that I dont have any physical hardware of the server, I am just running this on VMware windows server.  
DDSN
DDSN Reply SyedShariq  Created Aug 20, 2021 10:26:35 (1) (0)
We cannot remotely locate the error in your installation procedure or find the related information. Therefore, you are advised to contact Huawei TAC to remotely locate the fault.  
SyedShariq
SyedShariq Reply DDSN  Created Aug 20, 2021 10:45:25 (0) (0)
Alright. thanks for the help.  
All Answers
Dear friend!
Please rest assured that we'll be back with an answer shortly.
View more
  • x
  • convention:

DDSN
DDSN Admin Created Aug 20, 2021 09:51:19

Hi user_4342345,
Please ensure that the IP addresses of the server management port, eth0 port, and switch are on the same network segment of the PC where EasySuite is installed. The default IP address of the iBMC management network port is 192.168. 2.100, and the subnet mask is 255.255. 255.0.
View more
  • x
  • convention:

SyedShariq
SyedShariq Created Aug 20, 2021 10:09:32 (0) (0)
Ok I have changed the start-end ip to --> start 192.168.2.2 end 192.168.2.2 and BMC to 192.168.2.100 but its still not passing the check. Also note that I dont have any physical hardware of the server, I am just running this on VMware windows server.  
DDSN
DDSN Reply SyedShariq  Created Aug 20, 2021 10:26:35 (1) (0)
We cannot remotely locate the error in your installation procedure or find the related information. Therefore, you are advised to contact Huawei TAC to remotely locate the fault.  
SyedShariq
SyedShariq Reply DDSN  Created Aug 20, 2021 10:45:25 (0) (0)
Alright. thanks for the help.  

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.