Got it

Need huawei imanger U2000

Created: Oct 26, 2020 23:34:08Latest reply: Oct 27, 2020 01:06:06 340 3 0 0 0
  Rewarded HiCoins: 0 (problem resolved)
Dear pls provide a link for huawei imanger u2000 to configure 5608t

Featured Answers

Recommended answer

liqiang185
Admin Created Oct 27, 2020 01:06:06

Dear friend!

We do not describe the configuration of the MA5608T. However, you can manage the MA5608T by referring to the U2000 product documentation. This document describes how to configure access network devices in detail. The MA5608T is a typical access CO device. Therefore, you can refer to this manual for configuration.


Link:  Access Network Management


Thank you!


View more
  • x
  • convention:

alexander.grosello
alexander.grosello Created Dec 14, 2020 18:25:33 (0) (0)
Great  
All Answers

You can go to : https://support.huawei.com/hedex/hdx.do?docid=EDOC1100078669&id=dccap_0017&lang=en 


or try the following procedure:


Adding an OLT to the U2000

Prerequisites

The SNMP parameters are configured on NEs and the U2000, also the configurations must be the same between them.

Navigation path to SNMP parameter configuration on the U2000: Choose Administration > NE Communicate Parameter > NE Access Protocol Parameters from the main menu.

Procedure

  1. Right-click in the Main Topology and choose New > NE from the shortcut menu.

  2. In the dialog box that is displayed, choose Access NE from the navigation tree and set the following parameters:



    dccap_0017_01.png

  • IP Address

  • Device Name (To obtain the device name, click an icon on the right. sysname is the device name. The IP address is used as the default device name if no names are entered.)

  • Device Alias (Optional, which is used to mark the installation site. Chinese characters are supported.)

  • Physical path (Optional)

  • Remarks (Optional. For example, if the branch name to which the device belongs is set, the number of devices of each branch will be counted.)

  • SNMP Parameters

  • Position


View more
  • x
  • convention:

Dear friend!

We do not describe the configuration of the MA5608T. However, you can manage the MA5608T by referring to the U2000 product documentation. This document describes how to configure access network devices in detail. The MA5608T is a typical access CO device. Therefore, you can refer to this manual for configuration.


Link:  Access Network Management


Thank you!


View more
  • x
  • convention:

alexander.grosello
alexander.grosello Created Dec 14, 2020 18:25:33 (0) (0)
Great  

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.