NE40E- Board Registration Status

Created: Aug 21, 2019 13:07:11Latest reply: Aug 21, 2019 13:12:45 62 4 0 0
  Rewarded Hi-coins: 5 (problem resolved)

How I can Check NE40E- Board Registration Status

  • x
  • convention:

Featured Answers
Mr.Jack
MVE Created Aug 21, 2019 13:12:45 Helpful(0) Helpful(0)

Run the display device [ pic-status | slot-id ] command to view information about the components installed on the NE40E. If [ pic-status | slot-id ] is specified, the command will display information about the broads.

Pay attention to the Register and Status fields in the displayed information.
Register field: indicates whether a component is successfully registered. The field value can be Registered or Unregistered. Registered indicates that a component is successfully registered. Unregistered indicates that a component is not registered.
Status field: indicates the component status. The field value can be Normal or Abnormal.
If the Register field values are Registered and the Status field values are Normal, as shown by the characters in boldface in the preceding displayed information, go on with the subsequent commissioning.
  • x
  • convention:

The%20Hope%20Diamond
All Answers
E.DR_91
E.DR_91 MVE Created Aug 21, 2019 13:11:22 Helpful(0) Helpful(0)

Dear
You can Check the Reference : NetEngine40E_V800R011C00SPC300
  • x
  • convention:

Vic_Mar
Vic_Mar Created Aug 21, 2019 13:13:29
ok dear I will  
I%20am%20an%20information%20Technology%20Engineer%3B%20I%20work%20as%20Head%20of%20section%20in%20Management%20Information%20System%20with%20over%20five%20years%20of%20experience%20specializing%20in%20Software%20Testing.%20I%20am%20looking%20forward%20to%20growing%20my%20management%20skills%20to%20develop%20and%20inspire%20my%20team%20and%20I%20am%20a%20MVE%20in%20this%20forum
E.DR_91
E.DR_91 MVE Created Aug 21, 2019 13:11:56 Helpful(0) Helpful(0)

You need to check whether all boards are properly installed and work normally.
Prerequisites
Logging In to the NE40E is complete.
Procedure
Run the display device [ pic-status | slot-id ] command to view information about the components installed on the NE40E. If [ pic-status | slot-id ] is specified, the command will display information about the broads.

<HUAWEI> display device
NE40E-X16's Device status:
-----------------------------------------------------------------------------
Slot # Type Online Register Status Role LsId Primary
-----------------------------------------------------------------------------
1 LPU Present Registered Normal LC 0 NA
7 LPU Present Registered Normal LC 0 NA
17 MPU Present Registered Normal MMB 0 Master
18 MPU Present Unregistered Abnormal MMB 0 NA
19 SFU Present Registered Normal OTHER 0 NA
20 SFU Present Registered Normal OTHER 0 NA
21 SFU Present Registered Normal OTHER 0 NA
22 SFU Present Registered Normal OTHER 0 NA
23 CLK Present Registered Normal OTHER 0 Master
24 CLK Present Unregistered Abnormal OTHER 0 NA
25 PWR Present Registered Abnormal OTHER 0 NA
27 FAN Present Registered Normal OTHER 0 NA
28 FAN Present Registered Normal OTHER 0 NA
31 FAN Present Registered Normal OTHER 0 NA
32 FAN Present Registered Normal OTHER 0 NA
33 PMU Present Registered Normal OTHER 0 Slave
34 PMU Present Registered Normal OTHER 0 Master
-------------------------------------------------------------------------------
Pay attention to the Register and Status fields in the displayed information.
Register field: indicates whether a component is successfully registered. The field value can be Registered or Unregistered. Registered indicates that a component is successfully registered. Unregistered indicates that a component is not registered.
Status field: indicates the component status. The field value can be Normal or Abnormal.
If the Register field values are Registered and the Status field values are Normal, as shown by the characters in boldface in the preceding displayed information, go on with the subsequent commissioning.

Troubleshooting
If the interface board or SFU is not registered, perform the following operations:
Check that the start-up time of the board has expired.
The time required for a board to complete registration after it is powered on is called the start-up time.
Normally, an LPU can complete the start-up process within 5 minutes. If the system software and related files need to be updated, an LPU can complete the start-up process within 10 minutes.
Normally, an SFU can complete the start-up process within 2 minutes. If the system software and related files need to be updated, an SFU can complete the start-up process within 5 minutes.
Wait until the start-up time expires. If the board is still unregistered when the start-up time expires, go to Step 2.
Check that the board type is supported by the system software.
Supported board types vary with system software versions. For the types of boards that are supported by this software version, see the chapter titled "Boards" in the HUAWEI NetEngine40E Universal Service Router Hardware Description.
If the board type is supported by this system software version but the board cannot be registered, go to Step 3.
Check that the board has been powered on.
Run the power on slot ? command in the user view. If "<null>" is displayed, all boards have been powered on.
If the slot number of the board is displayed, the board is not powered on. Check whether the power supply of the slot where the board resides is normal. If the indicator on the board is on, the power supply of this slot is normal.
If the power supply of the slot is abnormal, contact Huawei technical support personnel.
If the power supply of the slot is normal but the system still informs that the board is not powered on, the power module on the board is faulty. In this case, you need to replace the board.
If the power supply of the slave MPU is normal but the board still cannot be registered, go to Step 4.
If a new board cannot be registered, remove the board and then insert it back. If the board still cannot be registered, go to Step 5.
Collect the following information and contact Huawei technical support personnel:
Results of the preceding operation procedure.
Configuration files, log files, and alarm files of the NE40E.

Please To Check the reference : NE40E
Regards.
  • x
  • convention:

I%20am%20an%20information%20Technology%20Engineer%3B%20I%20work%20as%20Head%20of%20section%20in%20Management%20Information%20System%20with%20over%20five%20years%20of%20experience%20specializing%20in%20Software%20Testing.%20I%20am%20looking%20forward%20to%20growing%20my%20management%20skills%20to%20develop%20and%20inspire%20my%20team%20and%20I%20am%20a%20MVE%20in%20this%20forum
Mr.Jack
Mr.Jack MVE Created Aug 21, 2019 13:12:45 Helpful(0) Helpful(0)

Run the display device [ pic-status | slot-id ] command to view information about the components installed on the NE40E. If [ pic-status | slot-id ] is specified, the command will display information about the broads.

Pay attention to the Register and Status fields in the displayed information.
Register field: indicates whether a component is successfully registered. The field value can be Registered or Unregistered. Registered indicates that a component is successfully registered. Unregistered indicates that a component is not registered.
Status field: indicates the component status. The field value can be Normal or Abnormal.
If the Register field values are Registered and the Status field values are Normal, as shown by the characters in boldface in the preceding displayed information, go on with the subsequent commissioning.
  • x
  • convention:

The%20Hope%20Diamond

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login