NE 20 - IP POOL BASED ON RADIUS / Authentican without domain

@mrod Hi,
To create a ip pool, please refer to http://support.huawei.com/hedex/ ... 5252529&lang=en

Yes, you are able to remove the domain field when sending the username to the RADIUS server.
please excute command undo radius-server user-name domain-include to cancel the domain field included.

If you are using PPPoE you don't need to create a pool to be delivered by Radius. You only need to send a FRAMED-IP=xx.xx.xx.xx parameter and NE20 will apply to client during connection.

If you are using any dynamic routing protocol, you need to use import-route unr to advertise this IP sent by radius.

Hi Lu@LuizPuppin , and how do I set up the router to send that frame?

@chenhui , do I have to set up a dynamic pool in order to let the Radius Server deliver Ip address?

You need to configure your Radius Server to send the parameter Framed-IP-Address (8) with the IP address to the client. You use this parameter if you need to specify a fixed IP to a client.
If you don't need a fixed IP, you only configure a ip-pool like our friend @chenhui sent before.

Could you please give me an example how to configure a ip pool to that purpose? Because if I choose a local pool address will me given by the router itself, and I need my Radius handling this process.

The command undo ndo radius-server user-name domain-include did not work. Do you have any other suggestion?

What about DNS. Do I have to do something special in order to allow Radius server to inform what is the correct DNS server to use?

It worked just fine, but something new happened: I found out that my Radius server doesn't deliver DNS server information to users;
Do you have any suggestion on how to solve this problem? I tried to specify DNS IP on IP pool and nothing else but it didn't work.