Navigator command for "device uptime"
Created: Feb 9, 2021 10:53:01Latest reply: Feb 26, 2021 12:45:57
697
8
1
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hello, friend!
:cfg-get-outpower command is used to query the output optical power of a board.
Thanks! |
Chenxintao
Reply realtm7 Created Feb 9, 2021 11:29:42
(0)
(0)
OK, I see what you mean. The unit is optical power of the physical port on the board. This command is used to query the optical power of a physical port on the board. |
All Answers
|
Hello, friend!
:cfg-get-outpower command is used to query the output optical power of a board.
Thanks! |
Chenxintao
Reply realtm7 Created Feb 9, 2021 11:29:42
(0)
(0)
OK, I see what you mean. The unit is optical power of the physical port on the board. This command is used to query the optical power of a physical port on the board. |
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
