Got it

Huawei Enterprise Support Community

Community Forums Storage

[N8000 Parameter Configur...

[N8000 Parameter Configuration]How to choose parameters for creating a RAID grou

Created: Nov 25, 2013 09:38:13Latest reply: Nov 25, 2013 09:38:23 2236 1 0 0 0

View the author ^1#

When creating a RAID group, set relevant parameters based on the descriptions provided in this section.

Parameter Description

Parameter	Description	Setting
Name	This parameter indicates the name of the new RAID group.	When setting the name of the new RAID group, note the following: The name of the RAID group must be unique. The name of the RAID group consists of DBC-case alphabetic letters, DBC-case numbers, hyphens, underscores. This name of the RAID group ranges from 1 to 32 characters.
Disk Type	This parameter indicates the disk type of the new RAID group.	-
Level	This parameter indicates the level of the new RAID group. NOTE: The read and write performance and security performance vary with the level of the RAID group.	The value of this parameter can be: RAID 0 RAID 1 RAID 3 RAID 5 RAID 6 RAID 10 RAID 50 The default RAID group level is RAID 5.
Sub-Group Disks	This parameter is available only when you set the RAID Level to RAID 10 or RAID 50. For RAID 10, this parameter indicates the number of hard disks in each RAID 1 subgroup in a RAID 10 group. For RAID 50, this parameter indicates the number of hard disks in each RAID 5 subgroup in a RAID 50 group.	For RAID 10, the value of this parameter must be no less than 2, and can exactly divide the total number of member disks in the RAID group. For RAID 50, the value of this parameter must be no less than 3, and can exactly divide the total number of member disks in the RAID group.
Auto	After you select Auto, the system indicates member disks automatically.	-
Manual	If you select Manual, specify the member disks of the RAID group in the free disk list.	-
Number of RAID group member disks	This parameter indicates the number of the specified number disk. This parameter is available only when Manual is selected.	-
Items	This parameter indicates the number of total disks.	-
Selected	This parameter indicates the number of disks in the RAID group.	-
Total Capacity (GB)	This parameter indicates the capacity of the selected disks. The capacity of a RAID group is the total capacity of all member disks.	-

x
convention：
Emotion(0)

Like (0) Dislike (0) Favorite(0) Report

 Previous: [N8000 Parameter Configuration]How to choose parameters for creating a LUN?

Next: [N8000 Parameter Configuration]How to modify the system time and time zone when

(0) (0)

^2#

user_1745 Created Nov 25, 2013 09:38:23

Thanks.

View more

x
convention：

Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:

Politically sensitive content
Content concerning pornography, gambling, and drug abuse
Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy

Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.

Please bind your phone number to obtain invitation bonus.