MSTP Configuration Guide

wissal · Created Jun 3, 2018 05:22:32

useful document, thanks

yjhd · Created Nov 5, 2018 01:03:28

The grounding requirements are applicable to the device that needs to be grounded.
•When installing the device, always connect the grounding facilities first. When removing the device, always disconnect the grounding facilities last.
•Ensure that the grounding conductor is intact.
•Do not operate the device in the absence of a suitably installed grounding conductor.
•The device must be connected to the PGND permanently. Before operating the device, check the electrical connections of the device, and ensure that the device is properly grounded.

yjhd · Created Nov 24, 2018 03:37:18

OSN7500/3500/2500/1500 will no new version

GongXiaochuan · Created Nov 24, 2018 06:02:42

Moreover, MSTP allows frames/packets assigned to different VLANs to follow separate paths, each based on an independent MSTI, within MST Regions composed of LANs and or MST Bridges. These Regions and the other Bridges and LANs are connected into a single Common Spanning Tree (CST).

faysalji · Created Nov 29, 2018 04:31:52

good summary of the products

faysalji · Created Nov 29, 2018 04:32:35

the configuration process shown in the video is very useful...

faysalji · Created Nov 29, 2018 04:33:05

Thanks for sharing MSTP Configuration Guide-2811107-1

user_2915719 · Created Nov 30, 2018 12:00:35

That's basically the most common used models, suites most cases.

MSTP Configuration Guide

This article contains more resources

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

MSTP Configuration Guide

This article contains more resources

Third Party’s Trade Secret

My Followers