This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Forums Switches
MPLS L2VC configuration

MPLS L2VC configuration

Created: Oct 21, 2017 07:02:24Latest reply: Sep 21, 2018 02:41:18 2706 4 0 0
  Rewarded Hi-coins： 0 (problem resolved)
display all floors #1

Hi,


I configured MPLS and it's working fine but L2VC not working. Someone please help me.


<Katwaria>display interface XGigabitEthernet 0/0/1.88
XGigabitEthernet0/0/1.88 current state : UP
Line protocol current state : UP
Description:
Route Port,The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
 L2VPN connection of the main PW is down
 L2VPN connection of the second PW is down
Current system time: 2017-10-21 06:17
    Last 300 seconds input rate 0 bits/sec, 0 packets/sec
    Last 300 seconds output rate 0 bits/sec, 0 packets/sec
    Realtime 0 seconds input rate 0 bits/sec, 0 packets/sec
    Realtime 0 seconds output rate 0 bits/sec, 0 packets/sec
    Input: 0 packets,0 bytes,
           0 unicast,0 broadcast,0 multicast
           0 errors,0 unknownprotocol
    Output:0 packets,0 bytes,
           0 unicast,0 broadcast,0 multicast
           0 errors
    Input bandwidth utilization  :    0%
    Output bandwidth utilization :    0%


  • x
  • convention：

I have this problem too (0) Favorite(0) Share Report
Featured Answers
Martian_superman
Created Sep 16, 2018 11:42:36 Helpful(0) Helpful(0)

Hello there!

Please check the configuration - whether both sides have the same parameters such as MTU, TAG mode, etc.

It is better to paste your configuration or contact your Huawei TAC.

You can send an email to eusupport@huawei.com.
  • x
  • convention：
All Answers
user_2844477
user_2844477 Created Oct 21, 2017 21:53:21 Helpful(0) Helpful(0)

Please post all related configuration so we can help you out.
  • x
  • convention：
Martian_superman
Martian_superman Created Sep 16, 2018 11:42:36 Helpful(0) Helpful(0)

Hello there!

Please check the configuration - whether both sides have the same parameters such as MTU, TAG mode, etc.

It is better to paste your configuration or contact your Huawei TAC.

You can send an email to eusupport@huawei.com.
  • x
  • convention：
cassiombc
cassiombc Created Sep 20, 2018 16:38:11 Helpful(0) Helpful(0)

HI, post your configurations please.
  • x
  • convention：
Cássio Cavalcante
Mark.hu
Mark.hu Created Sep 21, 2018 02:41:18 Helpful(0) Helpful(0)

Hi, post your detail configurations please.
  • x
  • convention：
Back to list

Comment

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

APP