Figure 1 shows the flowchart for mounting the CPE on the wall.
Figure 1
Step 1: Open the SIM card maintenance window of the eA680-208 and insert the SIM card, as shown in Figure 2.
Figure 2
NOTICE: When you install the SIM card maintenance window, insert the protrusion into the caging slot
to ensure that the SIM card maintenance window is waterproof. Do not fasten the screws until
the SIM card maintenance window has been correctly installed.
Step 2: Hold the wall-mounting frame tightly against the wall, use a level to adjust the horizontal position, and mark the fixing points with a marker, as shown in Figure 3.
Figure 3
Step 3 Use a drill with 8 mm drill bit to drill holes in the fixing points. Then remove the dust from the holes and install the expansion bolts, as shown in Figure 4.
Figure 4
Step 4 Align the two fixing points with the bolts on the wall and tighten the expansion bolt's screw
nut to fix the wall-mounting frame, as shown in Figure 5.
Figure 5
Step 5 Fix eA680-208 to the wall-mount frame using the dovetail groove, as shown in Figure 6.
Figure 6
Step 6 Tighten the wall-mounting frame's screw.
----End
You are welcomed to visit our “Enterprise Wireless Information Center” for further document.
http://support.huawei.com/onlinetoolsweb/elte/Info_en.jsp
