Modifying SC Port Settings
You can modify SC port settings by running commands.
- Log in to the SC as the admin user using an SSH tool.
- Modify the ports for SC functional modules. For details, see Table 2-1.
sys Module name Port parameter Value
NOTE:The following command uses the h323-config module as an example:
sys h323-config q931-h245-port 4000 (This command changes the parameter value of port q931-h245-port of the h323-config module to 4000.)
Table 1 SC port list Module Name
Port Parameter
Description
h323-config
q931-h245-port
Start port for TCP transfer
Value range: 1024~65534
sip-config
udp-port
SIP signaling listening port for UDP transfer mode
Value range: 1024~65535
tcp-port
SIP signaling listening port for TCP transfer mode
Value range: 1024~65535
tls-port
SIP signaling listening port for TLS transfer mode
Value range: 1024~65535
traversal-server-tcp-port
SIP signaling listening port for TCP transfer mode when the SC functions as the traversal server in the back-to-back solution
Value range: 1024~65535
traversal-server-tls-port
SIP signaling listening port for TLS transfer mode when the SC functions as the traversal server in the back-to-back solution
Value range: 1024~65535
media-config
media-start-port
Media start port configured on the SC
Value range: 20010~63536
media-h460-port
H460 media multiplexing port configured on the SC
Value range: 1024~65535
media-ice-mux-port
ICE signaling and media trunk multiplexing port configured on the SC
Value range: 1024~65535
