Migrate camera to other servers

Y_T_Z · Created May 26, 2021 12:07:16

Hi, dear!

Before that, the following tips you should know.

The purpose of manually migrating cameras is to adjust the cluster load, not to fix a camera to an MPU.
When manually migrating cameras, cameras for which recording plans have been set and checkpoint cameras under the MPUR cannot be migrated to the MPUT.
Do not manually migrate the collection device of the VIM to the MPUT node. Otherwise, the VIM data may fail to be subscribed to.

Log in to the iClient as the admin user and choose System Functions > Device Management > Device Configuration > Local Domain Device.
Select cameras to be manually migrated and click Manually Migrate.
Mount the camera to another server in the same cluster.
Click OK.

Y_T_Z · Created May 26, 2021 12:07:16

Hi, dear!

Before that, the following tips you should know.

The purpose of manually migrating cameras is to adjust the cluster load, not to fix a camera to an MPU.
When manually migrating cameras, cameras for which recording plans have been set and checkpoint cameras under the MPUR cannot be migrated to the MPUT.
Do not manually migrate the collection device of the VIM to the MPUT node. Otherwise, the VIM data may fail to be subscribed to.

Log in to the iClient as the admin user and choose System Functions > Device Management > Device Configuration > Local Domain Device.
Select cameras to be manually migrated and click Manually Migrate.
Mount the camera to another server in the same cluster.
Click OK.

Y_T_Z · Created May 29, 2021 08:45:45

Hello, is the problem solved?

Tadros · Created May 30, 2021 12:19:23

can you explain more about the type of other server and the camera type and the whole solution do you need ?

heshamk · Created May 31, 2021 09:16:34

Please find the below steps for migrating the camera.

Log in to the iClient as the admin user and choose System Functions > Device Management > Device Configuration > Local Domain Device.

Select cameras to be manually migrated and click Manually Migrate.

Mount the camera to another server in the same cluster.

Click OK.

Nasr · Created May 31, 2021 09:56:28

please confirm the type of the server, and if you need to migrate the camera you can perform this action by logining to the IVS client or iclient --> Device Management --> then migrate and choose which MPU you want to transfer.

Migrate camera to other servers

Recommended answer

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

Migrate camera to other servers

Recommended answer

Third Party’s Trade Secret

`@trans`drinking_poetry`~trans`

My Followers