Microwave
- x
- convention：
- Emotion(0)
|
Hello, Querying Traffic, Physical Bandwidth, or Bandwidth UtilizationThis section describes how to query the change curve of the traffic, physical bandwidth, or bandwidth utilization within a certain period. The FE/GE ports and the ports on the packet plane support this operation. PrerequisitesYou must be an NM user with NE maintainer authority or higher. The flow monitoring function is enabled on the Ethernet port. To enable the flow monitoring function on a port, see Setting Traffic, Physical Bandwidth, or Bandwidth Utilization of Ethernet Ports. Tools, Instruments, and MaterialsNCE  Web LCT also supports this operation and the steps are the same as those on the NCE. Background InformationAfter the flow monitoring function is enabled, the system saves the statistics about the received traffic and transmitted traffic with an interval of 15 minutes. In normal cases, the system stores the statistics that are collected in the last 30 days. In the system, every measurement entry shows the average transmit rate and average receive rate within a period of 15 minutes. You can query the statistics in the last 30 days. This operation allows only the queries about port-based Ethernet traffic by using NCE. To collect statistics about the traffic based on Tunnel/PW/egress queue/VLAN, see Browsing Current Ethernet Performance or Browsing Historical Ethernet Performance Data. Detail Thanks |
|
|
|
|
Hello, Querying Traffic, Physical Bandwidth, or Bandwidth UtilizationThis section describes how to query the change curve of the traffic, physical bandwidth, or bandwidth utilization within a certain period. The FE/GE ports and the ports on the packet plane support this operation. PrerequisitesYou must be an NM user with NE maintainer authority or higher. The flow monitoring function is enabled on the Ethernet port. To enable the flow monitoring function on a port, see Setting Traffic, Physical Bandwidth, or Bandwidth Utilization of Ethernet Ports. Tools, Instruments, and MaterialsNCE Web LCT also supports this operation and the steps are the same as those on the NCE. Background InformationAfter the flow monitoring function is enabled, the system saves the statistics about the received traffic and transmitted traffic with an interval of 15 minutes. In normal cases, the system stores the statistics that are collected in the last 30 days. In the system, every measurement entry shows the average transmit rate and average receive rate within a period of 15 minutes. You can query the statistics in the last 30 days. This operation allows only the queries about port-based Ethernet traffic by using NCE. To collect statistics about the traffic based on Tunnel/PW/egress queue/VLAN, see Browsing Current Ethernet Performance or Browsing Historical Ethernet Performance Data. Detail Thanks |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
