Hi every one..
if you have any problem on the microwave link here are some tips that can help you..
- First make sure there is no power alarm like:
Power alarm
Power failure
- Second take a look at the ODU, and make sure it is Unlocked and There is no alarm like:
ODU mute
Transmit off
- third make sure there is no loop running.
- Fourth make sure there is no alarm in the cards
- make sure there is no alarm like:
Radio TSL high
Radio TSL low
- There are problems happening for the signal because Interference , Bit errors or Weather instability, It can be found if we find alarm like:
MW LOF
MW LIM
MW RDI
MW FEC
MW BER
- take a look at the receiver signal level, and make sure there is no alarm like :
Radio RSL LOW
Radio RSL high
- make sure the configuration matches in the far end and near end, and is no alarm like:
MW CFG mismatch


