ME 909s-120 SIM interface ?

Hello,

The working config is:
ME909s-120
fw:11.617.01.00.00
usb mode miniPCI
ROS 6.36rc13 - here just works)
ROS 6.35.1(lte not working at all,ignoring direct-ip can make ppp work)
ROS 6.35.2(thought here it is working ONCE power resetting modem for 5 secs right after boot. if lte interface goes down or signal level falls critically it hags in configuration stage and you have to reboot then power reset for at least 5 secs)

Thanks

Hi

This is most definitely asked within an enterprise context (we want to use a batch of those modems in conjunction with various routerBoard hardware form Mikrotik - definitely not consumer-grade stuff) but I'm happy to move my question elsewhere. That being said I am absolutely sure no consumer has ever dealt with a Huawai ME 909s-120 :)

(duplicate post)

Hello@AlexTak,

I found this product in the enterprise product line, if not we can continue the discussion.

You can also upload photos if convenient so that we can solve your problems better.

Glad to help you! Any further questions, let us know.

Hello@AlexTak,
After a discussion with R & D, this module of ME 909S-120 does not come with a SIM card slot.
Because it is a separate 4G LTE module and needs to be used with other things, it is generally used with the LTE WIS card on the AR to connect to the wireless network.

Thanks for following up on this. Not quite sure how I ended up with an LTE modem with no SIM tray but at least I can stop looking !

Just out of curiosity do you have any reference to that "LTE WIS card" ?

Thanks for that.
I seem to have it working - same fw:11.617.01.00.00 as you and ROS 6.46.4.
That being said very little support from ROS as far as I can see - even the LTE scan doesn't seem to work (to show the various networks available). Any tricks or info you might have most welcome.

- again duplicate post - forum software not great TBH