Hi,
We have the following setup:
* Ne40-M2k-b routers : All router working as P/PE in a MPLS network
* Access ports configured as "port switch + trunk" (PE interface to a Switch S5735 ). We are not using sub-interfaces.
* Tryning to configuring L2VPN between two PE: Ethernet Point-to-Point Ethernet over MPLS with mpls l2vc but under interface vlanif xxx does not appear the command mpls l2vc.
¿ Is there any other way to map a VLAN to a mpls l2vc in Ne40-M2k-b?
Thanks,
M.A.