Manual aggregation

Dear friend!
Please rest assured that we'll be back with an answer shortly.

Мanual aggregation is aggregation without any link aggregation protocol.
In manual mode, you must manually create an Eth-Trunk and add member interfaces to the Eth-Trunk
This mode is recommended when at least one of the devices does not support LACP

Dear friend！

It is a LAG type.

A manual LAG is created by the user. When you add or delete a member port, you need not run the LACP protocol. In a manual LAG, a port can be in the UP or DOWN state. The system determines whether to aggregate a port according to its physical state (UP or DOWN), working mode, and rate.

Thank you!