Got it
Huawei Enterprise Support Community
Community Forums Routing & Switching
MAD in stack of S series ...

MAD in stack of S series fixed switches

Latest reply: Apr 21, 2017 00:58:41 1287 1 0 0 0
display all floors 1#
MAD in stack of S series fixed switches
  • x
  • convention：

Like (0) Dislike (0) Favorite(0) Share Report
Previous: Stack or cluster support on S series switches
Next: VS feature support on S series switch
ms.america
Created Apr 21, 2017 00:58:41

In V2R2 and earlier versions, the switch supports dual-active detection (DAD); in the versions later than V2R2, the switch supports multi-active detection (MAD).

Configure MAD on directly connected interfaces:
V2R2 and earlier versions:
Run the following commands on the directly connected interfaces:
[HUAWEI] interface gigabitethernet 0/0/5
[HUAWEI-GigabitEthernet0/0/5] dual-active detect mode direct
In V2R2 and later versions:
Run the following commands on the directly connected interfaces:

[HUAWEI] interface gigabitethernet 0/0/5
[HUAWEI-GigabitEthernet0/0/5] mad detect mode direct

Configure DAD in relay mode:
V2R2 and earlier versions:
(1) In a stack, configure DAD in relay mode on an inter-chassis Eth-Trunk:
[HUAWEI] interface eth-trunk 1
[HUAWEI-Eth-Trunk1] dual-active detect mode relay
[HUAWEI-Eth-Trunk1] quit
[HUAWEI] interface gigabitethernet 0/0/5
[HUAWEI-GigabitEthernet0/0/5] eth-trunk 1
[HUAWEI-GigabitEthernet0/0/5] quit
[HUAWEI] interface gigabitethernet 1/0/5
[HUAWEI-GigabitEthernet1/0/5] eth-trunk 1
(2) Configure Eth-Trunk relay on the relay agent:
[HUAWEI] interface eth-trunk 1
[HUAWEI-Eth-Trunk1] dual-active relay
[HUAWEI-Eth-Trunk1] quit
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] eth-trunk 1
[HUAWEI-GigabitEthernet0/0/1] quit
[HUAWEI] interface gigabitethernet 0/0/2
[HUAWEI-GigabitEthernet0/0/2] eth-trunk 1

In the versions later than V2R2:
(1) In a stack, configure MAD in relay mode on an inter-chassis Eth-Trunk:
[HUAWEI] interface eth-trunk 1
[HUAWEI-Eth-Trunk1] mad detect mode relay
[HUAWEI-Eth-Trunk1] quit
[HUAWEI] interface gigabitethernet 0/0/5
[HUAWEI-GigabitEthernet0/0/5] eth-trunk 1
[HUAWEI-GigabitEthernet0/0/5] quit
[HUAWEI] interface gigabitethernet 1/0/5
[HUAWEI-GigabitEthernet1/0/5] eth-trunk 1
(2) Configure Eth-Trunk relay on the relay agent:
[HUAWEI] interface eth-trunk 1
[HUAWEI-Eth-Trunk1] mad relay
[HUAWEI-Eth-Trunk1] quit
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] eth-trunk 1
[HUAWEI-GigabitEthernet0/0/1] quit
[HUAWEI] interface gigabitethernet 0/0/2
[HUAWEI-GigabitEthernet0/0/2] eth-trunk 1
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.