- Dynamic MAC address entries can be learned on an interface only after the interface is added to an existing VLAN.
- Each static MAC address entry can have only one outbound interface.
- When the aging time of dynamic MAC address entries is set to 0, dynamic MAC address entries do not age. To age MAC address entries, delete the aging time configuration.
- When MAC address learning is disabled in a VLAN and an interface in the VLAN on the S5700EI, S5710EI, S5700HI, S5710HI, and S5720EI and the discard action is configured for the interface, the interface does not discard packets from this VLAN. For example, MAC address learning is disabled in VLAN 2 but enabled in VLAN 3; Port1 in VLAN 2 and VLAN 3 has MAC address learning disabled and the discard action is defined. In this situation, Port1 discards packets from VLAN 3 but forwards packets from VLAN 2.
- When the interface frequently alternates between Up and Down, MAC address entries may be not aged within two aging period. At this time, you are advised to check the link quality or run the port link-flap protection enable command to configure link flapping protection.
MAC Use Precautions
Created: Jan 12, 2017 11:41:36Latest reply: Aug 10, 2018 15:55:26
1475
3
0
0
0
- x
- convention：
- Emotion(0)
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
