i have made the following attached scenario in the ENSP. The following configurations i have done on the devices:
1) Vlan 101 to 102 have been made on the Active Ac ,Standby AC , Swicthes 1 and Swicthes 2
2) Etherenet 0/0/0 and Etherenet 0/0/1 of the Access controllers and Gig 0/0/1 and Gig 0/0/2 of the swicthes are the trunk links
3) DhCP have been enabled on both of the controller.
4) Access points have connected to the Gig 0/0/3 of both switches and i have made these links trunk and also make this link PVID 100
5) The Stp is blocking the Active Ac Eth 0/0/1 port
But the point is that i have received the mac-address flapping messages on both the swicthes.
Can any body help me to solve the problem. ?
