MAC Address Filter

Hello, friend!

The configuration of MAC address filtering for Huawei ONTs is as follows:

On the ONT web page, go to the page for configuring MAC address filtering on a wireless network. Then perform configuration on the page.

Before the configuration, ensure that your Huawei ONT has been connected to the network and can access the Internet.

Note: The web page may vary according to ONTs. The actual web page prevails.

Enable WLAN MAC Filter: Select it to enable MAC address filtering on a wireless network.

Filter Mode:

1. Blacklist: Devices in this list are not allowed to access the network.

2. Whitelist: Only devices in this list are allowed to access the network.

Note: The blacklist and whitelist modes are configured globally, and cannot be used at the same time.

SSID Index: Specify the SSID index of the WLAN that needs MAC address filtering.

Source MAC Address: Specify the MAC address of the device in the configured filtering mode.

Tip: You can obtain an SSID index corresponding to the SSID name (Wi-Fi name) from wireless network information displayed on the ONT web page.

How to Configure MAC Address Filtering on a Wired Network

On the ONT web page, go to the page for configuring MAC address filtering on a wired network. Then perform configuration on the page.

Before the configuration, ensure that your Huawei ONT has been connected to the network and can access the Internet.

Note: The web page may vary according to ONTs. The actual page prevails.

Enable MAC Filter: Select it to enable MAC address filtering.

Filter Mode:

1. Blacklist: Devices in this list are not allowed to access the network.

2. Whitelist: Only devices in this list are allowed to access the network.

Note: The blacklist and whitelist modes are configured globally, and cannot be used at the same time.

Source MAC Address: Specify the MAC address of the device in the configured filtering mode.

Thanks!