MA5800 OLT - Failure: The number of telnet operations has reached the maximum of the system

Hello Dear,

Maybe a web visiti already exist. To query the configuration information about remote ONT web page login when a remote web visit already exists, do as follows:

huawei(diagnose)%%display remote-http ont information{ <cr>|<K> }:


  Command:

          display remote-http ont information   

  ----------------------------------------------------------------------------- 

  F/S/P                 :0/1/2                                                  

  ONT-ID                :0

  URL                   :https://x.x.x.x:8024  x.x.x.x indicates OLT IP address

                        :https://[x:x:x:x:x:x:x:x]:8024

                         x:x:x:x:x:x:x:x indicates OLT IPV6 address

  Proxy Port            :8024                                                   

  Proxy Duration        :45 min                                                 

  Protocol              :https                                                  

  ONT VLAN              :1                                                      

  ONT IP                :192.168.150.1                                          

  ONT Web Service Port  :7017                                                   

  -----------------------------------------------------------------------------

After find the ONT use the following command to delete a remote acces to the ONT:

The undo remote-http ont command is used to delete a remote ONT web page login connection.

I hope it help!