MA5633 Ports Description

yjhd · Created Dec 28, 2018 03:39:15

Introduces the 60 V AC power to the MA5633.

Two power cable ports are used for 60 V AC power supply. One RF power cable port is used for 60 V AC power supply through the connected cable without power inserter.

Finn92 · Created Dec 29, 2018 01:36:05

about Power cable port .
Block this port if you do not use it. Replace this port with an F connector when you use it. .
this is very important ..

SupperRobin · Created Dec 29, 2018 03:17:06

Developed based on the distributed architecture, the EA5800 series multi-service access device is positioned as the next-generation OLT for NG-PON. With virtual access technology, it provides a unified carrying platform for multiple services over one fiber network, such as broadband, wireless, video, and monitoring.

littlestone · Created Dec 29, 2018 06:06:23

Huawei SmartAX MA5633 is a CMC device based on DOCSIS 3.0 and DOCSIS 3.1 protocol. It is mainly aimed at digitalization and two-way transformation of cable TV network. It can provide broadcasting operators with high bandwidth and multi-service access.

NoOneNoWhere · Created Dec 29, 2018 06:38:16

It is helpful but it is better to share us more information. Such as provide us the scenario when using different ports, and how to avoid the issues when using the ports with the typical network scenarios

w1 · Created Dec 31, 2018 14:05:40

This port is very useful, the port information is very detailed, I am very interested for this post, which is very helpful to our daily troubleshooting. When these print records appear in the log, i may know the means of these port.

Port Type	Silkscreen	Description
Commissioning serial port	CONSOLE	Supports local maintenance and remote maintenance.
Upstream optical port	2 ports: 0, 1 1 port: OPTICAL	The number of upstream ports varies according to hardware configuration. For example, there might be 2 GPON/GE ports, or 1 XG-PON/GPON/10GE/GE port for upstream transmission.
Maintenance Ethernet port	ETH	A 100M Base-T commissioning Ethernet port and supports 100M full-duplex autonegotiation.
Power cable port	Power	Introduces the 60 V AC power to the MA5633. Two power cable ports are used for 60 V AC power supply. One RF power cable port is used for 60 V AC power supply through the connected cable without power inserter. NOTE: Block this port if you do not use it. Replace this port with an F connector when you use it.
Optical fiber entrance	FIBER0	Used for upstream transmission. When mounting the MA5633 in the cabinet, routing the optical fiber pass through the FIBER0 port.
Optical fiber entrance	FIBER1	Used for upstream transmission. When mounting the MA5633 onto a steel cable, routing the waterproof pigtail cable pass through the FIBER1 port.
RF port	RF OUT	Inputs and outputs CATV and data signals. Four RF ports can be independent shut down to save power.

MA5633 Ports Description

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

MA5633 Ports Description

Third Party’s Trade Secret

My Followers