MA5608T VLAN per User or Opt82

View the author · Created Feb 6, 2020 14:42:31

Dear friend！

If you want to enable the Option 82 function, confirm the following information:

1. User type

2. BRAS label type

3. Current service configuration

To ensure information security, we do not recommend you to display the trouble ticket on the website. Please contact Huawei TAC engineers to create a trouble ticket. Engineers will handle the trouble ticket online.

You can find the after-sales hotline at the following link:

https://e.huawei.com/en/service-hotline-query

Thank you！

View the author · Created Feb 4, 2020 21:34:45

Hello,
For configuring VLAN on the MA5608T, refer to the below method:

Create a VLAN.

Run the vlan to create a VLAN. VLANs of different types are applicable to different scenarios.

VLAN types and application scenarios:
VLAN Type	Configuration Command	VLAN Description	Application Scenario
Standard VLAN	To add a standard VLAN, run the vlan vlanid standard command.	Standard VLAN. Ethernet ports in a standard VLAN are interconnected with each other but Ethernet ports in different standard VLANs are isolated from each other.	Only available to Ethernet ports and specifically to network management and cascading.
Smart VLAN	To add a smart VLAN, run the vlan vlanid smart command.	One VLAN may contain multiple xDSL service ports or xPON service ports. The traffic streams of these ports, however, are isolated from each other. In addition, the traffic streams of different VLANs are also isolated. One smart VLAN provides access for multiple users and therefore saves VLAN resources.	Smart VLANs can be applied in residential communities to provide xDSL or xPON service access.
MUX VLAN	To add a MUX VLAN, run the vlan vlanid mux command.	One MUX VLAN contains only one xDSL service port or xPON service port. The traffic streams in different VLANs are isolated from each other. One-to-one mapping can be set up between a MUX VLAN and an access user. Hence, a MUX VLAN can identify an access user.	MUX VLANs are applicable to xDSL or xPON service access. For example, MUX VLANs can be used to distinguish users.
Super VLAN	To add a super VLAN, run the vlan vlanid super command.	The super VLAN is based on Layer 3. One super VLAN contains multiple sub-VLANs. Through an ARP proxy, the sub-VLANs in a super VLAN can be interconnected at Layer 3.	Super VLANs save IP addresses and improve the utilization of IP addresses. For a super VLAN, sub-VLANs must be configured. You can run the supervlan command to add a sub-VLAN to a specified super VLAN. A sub-VLAN must be a smart VLAN or MUX VLAN.

NOTE:

To add VLANs with consecutive IDs in batches, run the vlan vlanid to end-vlanid command.
To add VLANs with inconsecutive IDs in batches, run the vlan vlan-list command.

Example

Create VLAN 50 for extension of the VLAN ID. And the type of VLAN is smart.

huawei(config)#vlan 50 smart

Create VLAN 55-60 for extension of the VLAN ID. And the type of VLAN is smart.

huawei(config)#vlan 55 to 60 smart

Create VLAN 65, 73 and 52 for extension of the VLAN ID. And the type of VLAN is smart.

huawei(config)#vlan 65,73,52 smart

Thanks

View the author · Created Feb 6, 2020 14:42:31

Dear friend！

If you want to enable the Option 82 function, confirm the following information:

1. User type

2. BRAS label type

3. Current service configuration

To ensure information security, we do not recommend you to display the trouble ticket on the website. Please contact Huawei TAC engineers to create a trouble ticket. Engineers will handle the trouble ticket online.

You can find the after-sales hotline at the following link:

https://e.huawei.com/en/service-hotline-query

Thank you！

MA5608T VLAN per User or Opt82

Recommended answer

Example

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

MA5608T VLAN per User or Opt82

Recommended answer

Example

Third Party’s Trade Secret

My Followers