MA5608T factory reset

Hi!

If you want to reset all the settings on an MA5608T to the factory settings, you can erase the flash data as per below:

i have same issue, i cant log in in to ma5608t and I need to reset configuration. but cant login, so is posible to reset config in boot/hardware button to reset flash? please help me...

hi，It should be noted that this operation will make all configurations clear, please be cautious

 

 

First connect the computer to the console port, restart the button, press it, print through the serial port, and see the boot process，

 After the bios is loaded, When you see the displayed information, press D in 3 seconds to enter, enter the password huawei123

and then perform the erase operation，

 Note ：that the erase operation will delete all configurations and return to the factory settings state. The username and password are the default username and password.

if you just forget the username and password of the device ,not need make the device as factory default settings , you just need using the U2000 to reset the password of the root user , then you can connect to device and doing everything . refer to below link

http://support.huawei.com/hedex/hdx.do?docid=EDOC1100007632&id=tp_lctmanagement&text=Managing%252520LCT%252520Users&lang=en

If you have cleared the console password of a Huawei switch or router, the operations are the same.

I can't login in MA5608T via telnet. What to do ???

can you share u2000 to me?

Hi group, triyng to reset password here too, I´ve tried to do as shown here, but I only have options

0 Boot from flash

1 Load Flash

9 Reboot system

any ideas??

any other password rather than huawei123 with more priviledges to see the rest of the menu?

Thanks

Regards,

Hernan.-

hi i have olt i need config outo