MA5600T Board Reset

Hi, friend.

Yes, you could use the board reset command.

Function

This command is used to reset a board. If the service is faulty, the chipset on the reset board is ineffective, or if you locate any test problems, run this command.

NOTE: Resetting the board interrupts ongoing services. Therefore, run this command with caution.

Format

board reset frameid/slotid

Parameters

frameid/slotid: Indicates the subrack ID and slot ID. This command only takes effect to reset the service board that communicates with the control board. It is not used for the power interface board. To reset the control board, run the reboot command.

Modes

Global config mode

Level

Operator level

Example

To reset the board in slot 0/3, do as follows:

Thanks.

Hi!

If you want to reset all the settings on an MA5600T to the factory settings, you can erase the flash data as per below:


MA5600T(diagnose)%%erase                                                        
{ flash<K> }:flash                                                              
{ data<K>|language<K> }:data  

If you want to reset only the user and password, you can undo the terminal user name.

Please try this and keep me informed.