Category : Residential
Inverter : 5kTL-L1 Huawei Inverter and
Battery Capacity : 5kwh
1. Quick Setting
(After basic commissioning on inverter) in the main menu, tap the Quick Settings option è then change the grid code to IEC 61727, and adjust the remaining options accordingly then tap next èyou can see the indicator whether the inverter is connected to the server or not (3rd picture) and make sure the battery is connected and detected, then tap nextèchange the working mode settings to maximum self-consumption.
Then check the “I have been authorized by the owner” statement in the top of the screen, then tap next. In the next page, we can see that the inverter is already connected to everything essential in the process installation, especially the Luna2000, Powermeter and the FusionSolar management system server.
2. Battery Control Parameter Setting
To setup the battery control parameters, in the main menu, go to Power Adjustment in the bottom right of the menu è tap the active power control, and set the control mode to Grid connected with zero power, closed-loop controller to inverter, limitation mode to total power, power adjustment period to 0,5 second, and power control hysteresis to 0,03 kW according to the image above (3rd picture).
Then go back to the power adjustment setting, and tap the battery control option. Put the end-of-charge at either 80% or 100% and end-of-discharge at 20%. This is to persevere the lifetime of the inverters and the battery, and then set the rest of the parameters according to the image above (4th picture).
3. Feature Parameter Setting
To setup the feature parameters, from the main menu tap setting on the bottom left options èthen tap the parameter features, and adjust the parameters according to the image above (2nd picture).
