Got it

LTE Bandwidth

Created: Jan 29, 2020 02:25:32Latest reply: Jan 29, 2020 04:59:23 779 3 16 0 0
  Rewarded HiCoins: 0 (problem resolved)

Dear Expert,


Please tell me which bandwidths are available in LTE network?


Thanks!

Featured Answers

Recommended answer

BetterMing
Created Jan 29, 2020 02:51:22

Hello, Unicef

You can refer to the following information.


LTE Bandwidth

MOPrb
Parameter IDLteBandWidth
Parameter Name

LTE Bandwidth

NE

BTS3900, BTS3900 LTE

MML Command

ADD PRB

MOD PRB

LST PRB

Meaning

Indicates the LTE cell bandwidth. This parameter takes effect only when DeployMode is set to GUARD_BAND. This parameter applies only to NB-IoT.

IsKey

NO

Mandatory

YES

Dynamic Attribute

NO

Feature ID

MLBFD-12000102

Feature Name

LTE Guardband Deployment

Value Type

Enumeration Type

GUI Value Range

LTE_SYSTEM_BW_10M(LTE_SYSTEM_BW_10M), LTE_SYSTEM_BW_15M(LTE_SYSTEM_BW_15M), LTE_SYSTEM_BW_20M(LTE_SYSTEM_BW_20M)

Enumeration Number/Bit

LTE_SYSTEM_BW_10M~3, LTE_SYSTEM_BW_15M~4, LTE_SYSTEM_BW_20M~5

Unit

None

Actual Value Range

LTE_SYSTEM_BW_10M, LTE_SYSTEM_BW_15M, LTE_SYSTEM_BW_20M

Default Value

None

Recommended Value

None

Initial Value Setting Source

Radio Planning (Internal planning)

Impact

Prb

Parameter Relationship

-Configuration constraints:

  • When the AnchorCarrierFlag and DeployMode parameters in a Prb MO are set to TRUE and GUARD_BAND, respectively: For PRBs with the same LocalCellId in the Prb MO, if the AnchorCarrierFlag and DeployMode parameters are set to FALSE and GUARD_BAND, respectively, the LteDlEarfcn and LteBandWidth must be the same as the LteDlEarfcn and LteBandWidth parameters in the Prb MO instance with AnchorCarrierFlag set to TRUE.

Access

Read & Write

Service Interrupted After Modification

Yes

Interruption Scope

Cell

Interruption Duration (min)

Less than 0.1 minute

Caution

None

Validation of Modification

The parameter modification takes effect after the cell is automatically reset.

Impact on Radio Network Performance

None

Introduced in Version...

BTS3900: V100R012C00

BTS3900 LTE: V100R012C00

Attribute

Radio

Applicable Mode

L

In addition to the parameters in the article, LTE also supports 3MHz and 5MHz.

Thanks!

View more
  • x
  • convention:

hpl_Panda
hpl_Panda Created Nov 16, 2021 04:32:20 (0) (0)
 
All Answers

Hello, Unicef

You can refer to the following information.


LTE Bandwidth

MOPrb
Parameter IDLteBandWidth
Parameter Name

LTE Bandwidth

NE

BTS3900, BTS3900 LTE

MML Command

ADD PRB

MOD PRB

LST PRB

Meaning

Indicates the LTE cell bandwidth. This parameter takes effect only when DeployMode is set to GUARD_BAND. This parameter applies only to NB-IoT.

IsKey

NO

Mandatory

YES

Dynamic Attribute

NO

Feature ID

MLBFD-12000102

Feature Name

LTE Guardband Deployment

Value Type

Enumeration Type

GUI Value Range

LTE_SYSTEM_BW_10M(LTE_SYSTEM_BW_10M), LTE_SYSTEM_BW_15M(LTE_SYSTEM_BW_15M), LTE_SYSTEM_BW_20M(LTE_SYSTEM_BW_20M)

Enumeration Number/Bit

LTE_SYSTEM_BW_10M~3, LTE_SYSTEM_BW_15M~4, LTE_SYSTEM_BW_20M~5

Unit

None

Actual Value Range

LTE_SYSTEM_BW_10M, LTE_SYSTEM_BW_15M, LTE_SYSTEM_BW_20M

Default Value

None

Recommended Value

None

Initial Value Setting Source

Radio Planning (Internal planning)

Impact

Prb

Parameter Relationship

-Configuration constraints:

  • When the AnchorCarrierFlag and DeployMode parameters in a Prb MO are set to TRUE and GUARD_BAND, respectively: For PRBs with the same LocalCellId in the Prb MO, if the AnchorCarrierFlag and DeployMode parameters are set to FALSE and GUARD_BAND, respectively, the LteDlEarfcn and LteBandWidth must be the same as the LteDlEarfcn and LteBandWidth parameters in the Prb MO instance with AnchorCarrierFlag set to TRUE.

Access

Read & Write

Service Interrupted After Modification

Yes

Interruption Scope

Cell

Interruption Duration (min)

Less than 0.1 minute

Caution

None

Validation of Modification

The parameter modification takes effect after the cell is automatically reset.

Impact on Radio Network Performance

None

Introduced in Version...

BTS3900: V100R012C00

BTS3900 LTE: V100R012C00

Attribute

Radio

Applicable Mode

L

In addition to the parameters in the article, LTE also supports 3MHz and 5MHz.

Thanks!

View more
  • x
  • convention:

hpl_Panda
hpl_Panda Created Nov 16, 2021 04:32:20 (0) (0)
 
Excellent @BetterMing
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.