Loop &amp & Wi-Fi accesses

Sokrin · Created Dec 2, 2020 11:16:20

Hello friend!

If a network cable is connected to two LAN ports of an optical modem, a loop occurs on the port.
A port loop may cause a network storm and service faults. The ONT supports loop detection. If a
loop is detected on a LAN port, the LAN port is isolated to break the loop.

It is recommended that no more than 10 devices (including wired and Wi-Fi devices) be connected
to an ONT. If too many devices are connected, the user experience deteriorates

Regards,

chenhui · Created Dec 2, 2020 10:51:16

Hi,
Kindly wait a second, our engineer will feedback you as soon as we have the conclusion.

wissal · Created Dec 2, 2020 10:58:34

Hello,

Click the following link to obtain the information you need:

https://forum.huawei.com/enterprise/en/how-to-improve-your-ont-wi-fi-access-experience-through-configuration/thread/650563-100181

https://forum.huawei.com/enterprise/en/poor-wi-fi-signal-coverage-troubleshooting/thread/669307-100181

https://forum.huawei.com/enterprise/en/wi-fi-special-02-what-s-up-with-your-wi-fi-signal/thread/401641-875

Thanks

Sokrin · Created Dec 2, 2020 11:16:20

Hello friend!

If a network cable is connected to two LAN ports of an optical modem, a loop occurs on the port.
A port loop may cause a network storm and service faults. The ONT supports loop detection. If a
loop is detected on a LAN port, the LAN port is isolated to break the loop.

It is recommended that no more than 10 devices (including wired and Wi-Fi devices) be connected
to an ONT. If too many devices are connected, the user experience deteriorates

Regards,

kunthea · Created Dec 8, 2020 08:33:24

thanks all

Loop &amp & Wi-Fi accesses

Best answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Loop &amp & Wi-Fi accesses

Best answer

Third Party’s Trade Secret

My Followers