Got it

Logical port Role on Dorado V6 to connect a quorum server

Created: Aug 5, 2021 18:05:36Latest reply: Sep 29, 2021 12:30:25 1510 17 1 0 0
  HiCoins as reward: 0 (problem unresolved)

Hi guys,


I am configuring a HyperMetro Domain but when I add a Quorum Server to register e quorum links, there are no Storage Ports available to select in Local Quorum Links and Remote Quorum links sections.


I would like to know which the role of Logical ports (service, management or replication) I must be setted up.


I am not  found any information on Dorado Documentation about this.


Thanks,


Featured Answers

Recommended answer

little_fish
Admin Created Aug 6, 2021 06:37:15

Dear Caco,

In the active-active DC solution, it is recommended that a quorum server be deployed at a third site to perform arbitration. The quorum server and two DCs can be connected by a GE or 10GE network.


A storage system can use either an independent front-end port or a management port as the quorum port. The following describes their respective network connections.


You can use a Front-end Port or a Management Port as a Quorum Port.


For OceanStor Dorado 3000 V6, Dorado 5000 V6, and Dorado 6000 V6, each controller of the storage systems must have quorum links. 

For OceanStor Dorado 8000 V6 and Dorado 18000 V6, each quadrant of the storage systems must have quorum links.

NOTE:

The requirements for the management ports that can connect to the quorum server are the same as those for the single-DC deployment.


More information about Quorum Networks: https://support-it.huawei.com/docs/en-us/dorado-v6/hypermetro-userguide/aa_san_appendix_quor_net.html


Thanks.


View more
  • x
  • convention:

Caco
Caco Created Aug 6, 2021 13:23:04 (0) (0)
Dear little_fish,

I've read and reread all the related documentation ( Hypermetro Feature Guide) and found that snippet of documentation that you mentioned. I found the section that says "the port used for the quorum links can be a management port or a front-end port", however, at no point is it described which role this port is in the moment of the creation of the Logical Port. Through trial and error I found that Role should be "Replication" but that's not described anyw 
Caco
Caco Reply Caco  Created Aug 6, 2021 13:27:36 (0) (0)
Considering a Dorado V6, all the network configuration is defined on Logical Ports + its Role (Service, Management or Replication)  
Caco
Caco Created Aug 6, 2021 16:04:17 (0) (0)
Dear litte_fish,

I remember this, but which ROLE should I configure for Demo_Lif Logical Port to be available in this drop-down list? I have tested all Roles and only Logical Ports with the REPLICATION Role will be available in this configuration. Is correct?  
Caco
Caco Reply Caco  Created Aug 6, 2021 16:05:49 (0) (0)
See the image: https://1drv.ms/u/s!AvdA-bS5Kw4bg9U5Ew6N6tv2aChf1g?e=6QyGKw  
Laiheang
Laiheang Created Sep 29, 2021 12:30:10 (0) (0)
 
All Answers
Hello User. we are reviewing your question and we will answer you shortly. Thanks.
View more
  • x
  • convention:

  • x
  • convention:

Laiheang
Laiheang Created Sep 29, 2021 12:30:18 (0) (0)
 

Dear Caco,

In the active-active DC solution, it is recommended that a quorum server be deployed at a third site to perform arbitration. The quorum server and two DCs can be connected by a GE or 10GE network.


A storage system can use either an independent front-end port or a management port as the quorum port. The following describes their respective network connections.


You can use a Front-end Port or a Management Port as a Quorum Port.


For OceanStor Dorado 3000 V6, Dorado 5000 V6, and Dorado 6000 V6, each controller of the storage systems must have quorum links. 

For OceanStor Dorado 8000 V6 and Dorado 18000 V6, each quadrant of the storage systems must have quorum links.

NOTE:

The requirements for the management ports that can connect to the quorum server are the same as those for the single-DC deployment.


More information about Quorum Networks: https://support-it.huawei.com/docs/en-us/dorado-v6/hypermetro-userguide/aa_san_appendix_quor_net.html


Thanks.


View more
  • x
  • convention:

Caco
Caco Created Aug 6, 2021 13:23:04 (0) (0)
Dear little_fish,

I've read and reread all the related documentation ( Hypermetro Feature Guide) and found that snippet of documentation that you mentioned. I found the section that says "the port used for the quorum links can be a management port or a front-end port", however, at no point is it described which role this port is in the moment of the creation of the Logical Port. Through trial and error I found that Role should be "Replication" but that's not described anyw 
Caco
Caco Reply Caco  Created Aug 6, 2021 13:27:36 (0) (0)
Considering a Dorado V6, all the network configuration is defined on Logical Ports + its Role (Service, Management or Replication)  
Caco
Caco Created Aug 6, 2021 16:04:17 (0) (0)
Dear litte_fish,

I remember this, but which ROLE should I configure for Demo_Lif Logical Port to be available in this drop-down list? I have tested all Roles and only Logical Ports with the REPLICATION Role will be available in this configuration. Is correct?  
Caco
Caco Reply Caco  Created Aug 6, 2021 16:05:49 (0) (0)
See the image: https://1drv.ms/u/s!AvdA-bS5Kw4bg9U5Ew6N6tv2aChf1g?e=6QyGKw  
Laiheang
Laiheang Created Sep 29, 2021 12:30:10 (0) (0)
 

Dear Caco,

v6

Front-end port and Management port here. 

View more
  • x
  • convention:

Caco
Caco Created Aug 6, 2021 20:17:48 (0) (0)
Dear litte_fish,

I remember this, but which ROLE should I configure for Demo_Lif Logical Port to be available in this drop-down list? I have tested all Roles and only Logical Ports with the REPLICATION Role will be available in this configuration. Is correct? Please, see the image: https://1drv.ms/u/s!AvdA-bS5Kw4bg9U5Ew6N6tv2aChf1g?e=6QyGKw  
little_fish
little_fish Reply Caco  Created Aug 7, 2021 01:35:27 (1) (0)
Creating Logical Ports for IP Replication Links, For example Ethernet Port. https://support-it.huawei.com/docs/en-us/dorado-v6/hypermetro-userguide/aa_san_config_feature_port.html  
Caco
Caco Reply little_fish  Created Aug 11, 2021 16:29:30 (1) (0)
Thanks little_fish.  
little_fish
little_fish Reply Caco  Created Aug 12, 2021 05:12:42 (0) (0)
You are welcome.  
Good answer
View more
  • x
  • convention:

Logical port Role on Dorado V6 to connect a quorum server-4179231-1
View more
  • x
  • convention:

little_fish
little_fish Created Sep 30, 2021 01:02:40 (0) (0)
 

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.