[Problem Description]
Log view analysis of routing protocol convergence caused by abnormal optical module
[Problem Analysis]
Through analyze this logbuffer information，there is a problem of optical module problem，the problem have occurred two times at Nov 7 2018 05:52:05+03:00 and Nov 8 2018 06:03:36+03:00
So we think the cause of these problem maybe is leaded by Optical module exception in g0/1/1
In order to further analyze this problem please customer provide remote let check it.
#Nov 7 2018 05:52:05+03:00 PO-RMNS-USVLDRK-SW-PE-1 SRM/3/SFP_EXCEPTION:OID 1.3.6.1.4.1.2011.5.25.129.2.1.9 Optical module exception, SFP is not certified. (EntityPhysicalIndex=67125326, BaseTrapSeverity=5, BaseTrapProbableCause=136192, BaseTrapEventType=9, EntPhysicalContainedIn=67125261, EntPhysicalName=GigabitEthernet0/1/1, RelativeResource=Interface GigabitEthernet0/1/1 optical module exception, ReasonDescription=It has been observed that a transceiver has been installed that is not certified by Huawei Ethernet Switch. Huawei cannot ensure that it is completely adaptive and will not cause any adverse effects. If it is continued to be used, Huawei is not obligated to provide support to remedy defects or faults arising out of or resulting from installing and using of the non-certified transceiver. )
#Nov 8 2018 06:03:36+03:00 PO-RMNS-USVLDRK-SW-PE-1 SRM/3/SFP_EXCEPTION:OID 1.3.6.1.4.1.2011.5.25.129.2.1.9 Optical module exception, SFP is not certified. (EntityPhysicalIndex=67125326, BaseTrapSeverity=5, BaseTrapProbableCause=136192, BaseTrapEventType=9, EntPhysicalContainedIn=67125261, EntPhysicalName=GigabitEthernet0/1/1, RelativeResource=Interface GigabitEthernet0/1/1 optical module exception, ReasonDescription=It has been observed that a transceiver has been installed that is not certified by Huawei Ethernet Switch. Huawei cannot ensure that it is completely adaptive and will not cause any adverse effects. If it is continued to be used, Huawei is not obligated to provide support to remedy defects or faults arising out of or resulting from installing and using of the non-certified transceiver. )
[Root Cause]
the cause of these problem maybe is leaded by Optical module exception in g0/1/1
[Solution Description]
Need to check if the optical module is abnormal
In order to further analyze this problem please customer provide remote let us check it.
