Lithium Batteries do not charge
- x
- convention：
- Emotion(0)
|
Hello there! We faced a problem like that where the problem is that the BLVD contactor does not conduct current to the batteries, there are two solutions to this problem First, there is a cover next to the SMU from the left.
Unscrew this cover Where there is Battery switch (under the panel) , Press it in BAT ON position to power on the battery forcibly. You will hear the sound of connecting the contactor If it success,and the batteries will be returned to charge then return the switch as it was in Normal position. If it does not success second, you can use a wire for one-time connect touch from any cirtict breaker from the top of the rectifier with any cirtict breaker of the batteries, then you will hear the sound of the contactor while it conducts the current and the The batteries will be returned to charge, If both methods do not success , it is possible that the contactor has become faulty thanks |
user_4400193
Created Dec 9, 2021 17:56:16
(0)
(0)
Thank you for the response we didn’t this troubleshoots we will consider your suggestions and let you know what happened 
user_4400193
Created Dec 27, 2021 20:42:18
(0)
(0)
Thanks, we hesitated, but in the end we did and it success your second suggestion use a wire for one-time connect touch from any circuit breaker from the top of the rectifier with battery circuit breaker |
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
