Limit the max bitrate for the LTE cell to 200 - 300 kbps

dm602s3 · Created Sep 27, 2019 07:01:47

I assume the limitation is desired due to poor transmission resources. For this kind of scenario might want to consider the Transmission Overload Control Algorithm ( SET TOLCALG ) which will start releasing bearers when the tranmission overload condition is met (transmission resource configured with ADD RSCGRP ) or the transmission-based Admission Control Algorithm ( SET TACALG) which will prevent new users to connect to the eNodeB when the transmission congestion condition is met ( resource configured with ADD RSCGRP). However, these 2 method will impact all the cells on the eNB, not just one cell. One cell bandwidth limitation practical method seems to be reducing the number of cell RBs.

Neil_Tong · Created Sep 14, 2019 02:55:41

Hi dear,
you can reduce the signal strength or set a smaller broadband of the LTE cell.

of course, if you want to know more operation, please provide me more information about your purpose.

Neil_Tong · Created Sep 14, 2019 02:55:41

Hi dear,
you can reduce the signal strength or set a smaller broadband of the LTE cell.

of course, if you want to know more operation, please provide me more information about your purpose.

eugenmusat · Created Sep 20, 2019 10:07:41

What about manually block some RB ?

Neil_Tong · Created Sep 20, 2019 11:15:37

There are two methods:

1. Run the MOD CELL to modify the cell bandwidth, for example, 5M=25RB, 10M=50RB, 15M=75RB, 20M=100RB.

2. Run the ADD CELLRBRESERVE to block the RB number of the CELL.

Neil_Tong · Created Sep 20, 2019 15:03:29

Posted by eugenmusat at 2019-09-20 10:07 What about manually block some RB ?

of course, you can do it, then the traffic will be limited

user_2942081 · Created Sep 26, 2019 03:00:25

I think it is possible to limit the bandwidth of each person's registration data, such as carrier limited broadband.

Neil_Tong · Created Sep 26, 2019 11:17:54

Posted by user_2942081 at 2019-09-26 03:00I think it is possible to limit the bandwidth of each person's registration data, such as carrier li ...

yes, every IMSI that was registered from the carrier can be limited on the core network, thus, the speed will be limited too on the terminal that using an IMSI.

dm602s3 · Created Sep 27, 2019 07:01:47

I assume the limitation is desired due to poor transmission resources. For this kind of scenario might want to consider the Transmission Overload Control Algorithm ( SET TOLCALG ) which will start releasing bearers when the tranmission overload condition is met (transmission resource configured with ADD RSCGRP ) or the transmission-based Admission Control Algorithm ( SET TACALG) which will prevent new users to connect to the eNodeB when the transmission congestion condition is met ( resource configured with ADD RSCGRP). However, these 2 method will impact all the cells on the eNB, not just one cell. One cell bandwidth limitation practical method seems to be reducing the number of cell RBs.

Limit the max bitrate for the LTE cell to 200 - 300 kbps

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Limit the max bitrate for the LTE cell to 200 - 300 kbps

Best answer

Recommended answer

Third Party’s Trade Secret

My Followers