Got it

LAG Member Interfaces of the S5700 Are in Unselected State When the S5700 Connec

Latest reply: Apr 27, 2020 13:29:07 1720 4 0 0

Issue Description

 

When the S5700 connects to an H3C switch through an LAG, the two devices fail to ping each other.

 

Handling Process

 

1. Check member interfaces. The member interfaces are Up, and physical lines work properly.

2. Run the display eth-trunk command to check the link aggregation interface configuration. All member interfaces of the S5700 are in Unselected state, and member interfaces of the H3C switch work properly. That is, link aggregation negotiation fails.

3. Check the configuration at both ends.

S5700 configuration:

interface Eth-Trunk1
mode lacp
interface GigabitEthernet0/0/1
eth-trunk 1

H3C switch configuration:

link-aggregation group 1 mode static
interface Ethernet 1/0/1 
port link-aggregation group 1

According to the preceding configuration, both the S5700 and H3C switch use the static LACP mode; however, the two devices cannot interwork in static LACP mode.

4. Modification methods

− Method 1:
Run the undo mode command to change the link aggregation mode of the S5700 to manual. The member interfaces of the S5700 can work properly after the change.

− Method 2:
Change the link aggregation mode of the H3C switch to link-aggregation mode dynamic. The member interfaces of the S5700 can work properly after the change.

 

  • x
  • convention:

Nana00
Created Feb 25, 2016 08:40:02 Helpful(0) Helpful(0)

Suggestions

The manual link aggregation mode of the S5700 corresponds to the static LACP mode of the H3C switch.
l
The static LACP mode of the S5700 corresponds to the dynamic LACP mode of the H3C switch.

 

View more
  • x
  • convention:

user_1790389
Created Feb 25, 2016 09:33:50 Helpful(0) Helpful(0)

Thanks for sharing.

View more
  • x
  • convention:

adritorto
Created Apr 27, 2020 13:29:02 Helpful(0) Helpful(0)

amazing job
View more
  • x
  • convention:

adritorto
Created Apr 27, 2020 13:29:07 Helpful(0) Helpful(0)

thanks
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.