Got it
Enterprise
Community Forums Switches
LACP error logs on S5720

LACP error logs on S5720

Created: Aug 25, 2019 14:48:33Latest reply: Aug 25, 2019 14:49:16 673 1 1 0
  Rewarded HiCoins： 0 (problem resolved)
display all floors #1

The eth-trunk interface turns down, and we found some corresponding logs from the switch, could you guys help to explain these logs, and what should we do in the next action.

Thanks

 

Aug 19 2019 07:19:09 Switch - 7 %LACP/3/LAG_DOWN_REASON_PDU(l)[252]:The member of the LACP mode Eth-Trunk interface went down because the local device received changed LACP PDU from partner. (TrunkName=Eth-Trunk1, PortName=GigabitEthernet0/0/23, Reason=PartnerSyncFalse, OldParam=b1Synchronization:1, NewParam=b1Synchronization:0)

Aug 19 2019 07:19:09 Switch - 7 %LACP/3/LAG_DOWN_REASON_EVENT(l)[253]:The member of the LACP mode Eth-Trunk interface went down. (TrunkName=Eth-Trunk1, PortName=GigabitEthernet0/0/23, Reason=RxTimeout)

Aug 19 2019 07:19:09 Switch - 7 %LACP/3/LAG_DOWN_REASON_EVENT(l)[254]:The member of the LACP mode Eth-Trunk interface went down. (TrunkName=Eth-Trunk1, PortName=GigabitEthernet0/0/24, Reason=RxTimeout)


s5720LACP
  • x
  • convention：

I have this problem too (1) Favorite(0) Share Report
Previous: How to have the backup of swith1 and restore to swith2,
Next: QinQ between Huawei and Extreme Networks
Featured Answers

Best answer

(0) (0)
chenhui
Admin Created Aug 25, 2019 14:49:16 Helpful(0) Helpful(0)

Hello,
From the logs, the eth-trunk interface turns down because of the changed LACP PDU received on the local device, please check the eth-trunk configuration on the remote device to find out if the configuration had been modified. If so, please find out the different configuration and do the same configuration on local device.
View more
  • x
  • convention：
All Answers
chenhui
chenhui Admin Created Aug 25, 2019 14:49:16 Helpful(0) Helpful(0)

Hello,
From the logs, the eth-trunk interface turns down because of the changed LACP PDU received on the local device, please check the eth-trunk configuration on the remote device to find out if the configuration had been modified. If so, please find out the different configuration and do the same configuration on local device.
View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2020 Huawei Technologies Co., Ltd. All rights reserved.

APP

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.