L2VPN

Hi RiDesa,

As far as I know, this feature is not supported on ensp routers.

Check your configuration. When configuring CCC local connection on the router, you need to add the following command on the PE: 

interface loopback 1 

 ip address 1.1.1.1 32

You can refer to https://support.huawei.com/hedex/hdx.do?docid=EDOC1100168821&id=EN-US_TASK_0172369905&lang=en.

I hope it helps!

HI @RiDesa;

I repeated your configuration and works properly,

verify with
display interface brief
display vll ccc
display l2vpn ccc-interface vc-type all

[Huawei]disp vll ccc

total  ccc vc : 1

local  ccc vc : 1,  1 up

remote ccc vc : 0,  0 up

name: ce3-ce4, type: local, state: up, 

intf1: GigabitEthernet0/0/1 (up), access-port: false

intf2: GigabitEthernet0/0/2 (up), access-port: false

VC last up time : 2020/12/21 06:38:48

VC total up time: 0 days, 0 hours, 3 minutes, 5 seconds

[Huawei]display l2vpn ccc-interface vc-type all

Total ccc-interface of CCC : 2 

up (2), down (0) 

Interface                          Encap Type               State     VC Type 

GigabitEthernet0/0/1               ethernet                 up        ccc     

GigabitEthernet0/0/2               ethernet                 up        ccc     

[Huawei]