L2TPv3 Multiple VLANs

StarOfWest · Created May 15, 2018 06:26:39

L2TPv3 support only point-to-point connections, so you must use a different tunnel, with different source IP and destination IP. When there are multiple tunnels to be configured, the IP setting for source and destination should not overlap.

w1 · Created May 12, 2018 20:43:40

From the Error information, it indicated that it only support only one VLAN

StarOfWest · Created May 14, 2018 08:16:57

Hello,

Did you tried to apply tunnel0/0/0 to vlanif 207?
if not, please try to configure a separate tunnel interface, like tunnel 0/0/1 and then apply it to different vlan interface.

grayfox · Created May 14, 2018 08:35:53

When I try to create another tunnel using the same destination address, it says another tunnel cannot be created.

StarOfWest · Created May 15, 2018 06:26:39

L2TPv3 support only point-to-point connections, so you must use a different tunnel, with different source IP and destination IP. When there are multiple tunnels to be configured, the IP setting for source and destination should not overlap.

grayfox · Created May 17, 2018 14:33:22

Thanks, we have found two new solutions to use VXLAN and ethernver over GRE.

grayfox · Created May 17, 2018 14:33:35

Thanks, we have found two new solutions to use VXLAN and Ethernet over GRE.

Lieza · Created May 18, 2018 05:53:46

Posted by grayfox at 2018-05-17 14:33 Thanks, we have found two new solutions to use VXLAN and Ethernet over GRE.

thank you. great share L2TPv3 Multiple VLANs-2666999-1

StarOfWest · Created May 18, 2018 06:51:25

Great!

Finn92 · Created May 18, 2018 11:04:39

wow good share~

L2TPv3 Multiple VLANs

Best answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

L2TPv3 Multiple VLANs

Best answer

Third Party’s Trade Secret

My Followers