L.RRC.SetupFail.NoReply

BetterMing · Created Feb 21, 2020 07:19:35

Hello, Shiiter.
The error code L.RRC.SetupFail.NoReply occurs because of the number of RRC connection establishment failures due to no response from the UE. This is an optimization problem and requires test engineers to come up with an optimization solution after testing.
Thanks！

BetterMing · Created Feb 21, 2020 07:19:35

Hello, Shiiter.
The error code L.RRC.SetupFail.NoReply occurs because of the number of RRC connection establishment failures due to no response from the UE. This is an optimization problem and requires test engineers to come up with an optimization solution after testing.
Thanks！

Shiiter · Created Feb 21, 2020 07:37:32

okey,
Maybe i need to change Azimuth and Tilt but do i need to change any timer?

TWH · Created Feb 21, 2020 08:05:38

Posted by Shiiter at 2020-02-21 07:37 okey,Maybe i need to change Azimuth and Tilt but do i need to change any timer?

Need testers to provide configuration modification suggestions. Not recommended for private modification

Shiiter · Created Feb 21, 2020 08:11:09

how to check DL interfernce of LTE cell

user_4355665 · Created Aug 20, 2021 11:22:39

You need to use these commands

MOD RACHCFG:LOCALCELLID=2,MESSAGESIZEGROUPA=B256_MSG_SIZE_GROUPA;
MOD UETIMERCONST:LOCALCELLID=2,T300=MS1500_T300;

user_4280343 · Created Dec 22, 2021 07:53:04

Posted by user_4355665 at 2021-08-20 11:22 You need to use these commandsMOD RACHCFG:LOCALCELLID=2,MESSAGESIZEGROUPA=B256_MSG_SIZE_GROUPA;MOD U ...

is there any impact on the user expirence and like improvments and get good throughput ?

Majdi.Chebil · Created Dec 23, 2021 07:22:03

I hope that you solved your problem!

L.RRC.SetupFail.NoReply

Recommended answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

L.RRC.SetupFail.NoReply

Recommended answer

Third Party’s Trade Secret

My Followers