IVS 1800 serial number
Created: Dec 22, 2021 12:26:30Latest reply: Dec 22, 2021 12:29:55
299
10
0
0
0
HiCoins as reward：
0
(problem unresolved)
- x
- convention：
- Emotion(0)
Featured Answers
an.albasri
Created Dec 22, 2021 14:23:40
(0)
(0)
Thanks Stephen, would please tell me what should I use as default pw for the CLI admin. "Change_Me" it didn't work! 
stephen.xu
Reply an.albasri Created Dec 23, 2021 04:47:33
(0)
(0)
The password is the same as the OMU portal. So you can log in to the OMU portal, the username and password are the same. If you forget the password, you can do as follows to reset the password. https://support.huawei.com/hedex/hdx.do?docid=EDOC1100159944&id=EN-US_TOPIC_0255461633&lang=en
an.albasri
Reply stephen.xu Created Dec 23, 2021 07:05:04
(0)
(0)
I'm sorry Stephen but that didn't work! I used OMU admin username and password in putty but it shows access is denied! there must be common password for admin trying to access the device from CLI.
stephen.xu
Reply an.albasri Created Dec 23, 2021 07:14:21
(0)
(0)
Do you try to see the IVS1800 device? I think you can see the SN on the labels
an.albasri
Reply stephen.xu Created Dec 23, 2021 07:21:08
(0)
(0)
the device already installed on a remote area. I need to send team to get the SN. it will be waste of time and resources if I can get it directly from the system.
stephen.xu
Reply an.albasri Created Dec 23, 2021 07:37:57
(0)
(0)
Sorry, The password is not the same. I get the mistake. You need to use the OS admin password. If you are the first time to log in, there is no password.
an.albasri
Reply stephen.xu Created Dec 23, 2021 08:20:35
(0)
(0)
OK many thanks dear. It worked finally.
|
All Answers
an.albasri
Created Dec 22, 2021 14:23:40
(0)
(0)
Thanks Stephen, would please tell me what should I use as default pw for the CLI admin. "Change_Me" it didn't work!
stephen.xu
Reply an.albasri Created Dec 23, 2021 04:47:33
(0)
(0)
The password is the same as the OMU portal. So you can log in to the OMU portal, the username and password are the same. If you forget the password, you can do as follows to reset the password. https://support.huawei.com/hedex/hdx.do?docid=EDOC1100159944&id=EN-US_TOPIC_0255461633&lang=en
an.albasri
Reply stephen.xu Created Dec 23, 2021 07:05:04
(0)
(0)
I'm sorry Stephen but that didn't work! I used OMU admin username and password in putty but it shows access is denied! there must be common password for admin trying to access the device from CLI.
stephen.xu
Reply an.albasri Created Dec 23, 2021 07:14:21
(0)
(0)
Do you try to see the IVS1800 device? I think you can see the SN on the labels
an.albasri
Reply stephen.xu Created Dec 23, 2021 07:21:08
(0)
(0)
the device already installed on a remote area. I need to send team to get the SN. it will be waste of time and resources if I can get it directly from the system.
stephen.xu
Reply an.albasri Created Dec 23, 2021 07:37:57
(0)
(0)
Sorry, The password is not the same. I get the mistake. You need to use the OS admin password. If you are the first time to log in, there is no password.
an.albasri
Reply stephen.xu Created Dec 23, 2021 08:20:35
(0)
(0)
OK many thanks dear. It worked finally.
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
