Got it

It prompts error if change the working mode of MA5200G port to auto-negotiation

Latest reply: Mar 27, 2016 04:04:07 1346 1 0 0 0

Hello everyone,

It prompts error if change the working mode of MA5200G port to auto-negotiation from forced 100M full duplex, as follows:

[MA5200G-Ethernet1/0/4]negotiation auto
Port does not support this command OR 
'undo loopback' is necessary for this command !

Please help me! Thank you!

  • x
  • convention:

Created Mar 27, 2016 04:04:07

Two possible factors may be responsible for such a problem:

1. Loopback configuration for interface: execute display interface command to check if the interface is configured with loopback, as shown in the following red part:
[MA5200G-Ethernet1/0/4]disp inter e 1/0/4
Ethernet1/0/4 current state: up
Line protocol current state: up
  Hardware is WAN-FastEthernet,
  Address is 00e0-fc5f-bb14
  Description: ban-dao-lan-wan-2
  The Maximum Transmit Unit is 1500 bytes, the BandWidth is 100000 Kbits
  Send-frame-type is Ethernet_II, loopback not set

2. Otherwise, it indicates that FE optical interface does not support auto-negotiation, so it cannot be configured to that.


View more
  • x
  • convention:


You need to log in to comment to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits


Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Please bind your phone number to obtain invitation bonus.
Information Protection Guide
Thanks for using Huawei Enterprise Support Community! We will help you learn how we collect, use, store and share your personal information and the rights you have in accordance with Privacy Policy and User Agreement.