Hello, eNSP developers!
This post enquires whether the 'ttl propagate' command available on eNSP.
I want to change the mpls ttl processing mode from uniform to pipe.
In pipe mode, MPLS nodes from the mpls domain will not be displayed when running traceroute. Default is unform - display interface ip when traceroute.
So i've configured undo ttl propagate on PEs, restarted the devices but it seems that is not working. I've attached the project from eNSP.
By the way, there is no reset mpls ldp command on eNSP.
I've used S5700 do build mpls domain.
Can somebody confirm if available or not?
Thanks!